Dissertation > Excellent graduate degree dissertation topics show

Research on Concrete Hydration Heat of Raft Foundation and Numerical Simulation

Author: MuChunLong
Tutor: WuXian
School: Northeastern University
Course: Structural Engineering
Keywords: mass concrete hydration heat raft foundation temperature field finite element
CLC: TU755
Type: Master's thesis
Year: 2009
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


With the increase of China’s high-rise buildings, foundation slab of mass concrete structure in the modern widely used in construction projects of Civil Engineering, which performance and construction engineering technology research has become one of the focus points. This paper is begin with the actual project, and analysising the complex temperature field to the hydration heat in the early stage of concrete pouring and curing, the resulting thermal stress easily lead to on-load structure cracking, the threat of bearing capacity and safe life can not be ignored.Argument began with the temperature field formed the hydration heat in the age of 28 days and Related calculations, combined with engineering practice, used of ANSYS finite element software, made a thermal analysis to the mass concrete temperature field of the raft foundation of the high-rise building, calculated the temperature distribution that initial simulation based on a raft in the age of 28 days, used calculation method in order to predict the temperature field, provided the stage results For the realization of temperature-induced cracking trend assessment and the development of scientific construction technology of the cooling goals. And did a preliminary study to ascertain the basic parameters and boundary conditions of finite element analysis, analysised the impact to the temperature field which from the hydration heat coefficient m, the thermal conductivity of concrete, specific heat and so on. Through the comparison with the measured data to determine the foundation of high-level Building mass concrete is more appropriate for each parameter range.In the Trial period, arranged the program to the temperature sensor, made the temperature sensors and temperature detection system, an important role has been played to the completion of temperature monitoring at the scene, and it has a development of broader value. The law of the rich Temperature data obtained at the scene has played a good role to guide the circulating water cooling and to optimize the pouring process.Finally, finishing studied the measured data and Analog data, analysised the influencing factors to the temperature field of concrete, at the same time put forward to the further work and recommendations.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  6. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  7. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  8. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  9. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  10. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  11. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  12. Design of Testing Equipment for Electronic Products,TN06
  13. S-lay Installation Analysis for Deepwater Pipeline,TE973
  14. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  15. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  16. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  17. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  18. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5
  19. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  20. Sham hose drum drive means and hydraulic system of the structure,TE973
  21. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1

CLC: > Industrial Technology > Building Science > Construction > The project and the type of work > Concrete and reinforced concrete works
© 2012 www.DissertationTopic.Net  Mobile