Dissertation > Excellent graduate degree dissertation topics show

Research of Surface Roughness Network Data Collector System Based on ARM

Author: GuoXin
Tutor: XuJingBo
School: Harbin University of Science and Technology
Course: Communication and Information System
Keywords: Network embedded ARM anti-aliasing filtering TCP/IP
CLC: TP274.2
Type: Master's thesis
Year: 2014
Downloads: 6
Quote: 0
Read: Download Dissertation


Nowadays, computer and network have walked into the post PC age, and theembedded system has been widely applied in every walk of life. Under certainconditions, real-time monitoring running status of various kinds of industrialequipment can be realized through the network by combining the general industrialinstrumentation with a network data collector. In this way, all kinds of necessary dataat the scene can be measured on the remote site.Many of traditional industrialinstruments need to be measured at the scene, and the trouble can be solved throughusing the Internet. At the same time, this method can save a lot of cost for enterprises.This thesis is to study this network data acquisition system as the main content.In the course of surface roughness measurement, ARM9chip was chosen todesign a network data collector used for surface roughness measurement. It wasconnected with surface roughness measuring instrument in the common industry viaa serial port and equipped with the function of remote measurement.An importantpart is to build a suitable ARM9platform, select LINUX system as a developmentplatform for embedded development board, and build related hardware circuits, usingA/D converter and Ethernet extension interface for data transfer capabilities, as wellas prepare the appropriate TCP/IP communication protocol. Another important partof the subject after the A/D channel surface roughness of the finished collecting data,to design a digital anti-aliasing filter, collecting information on low-noise processing,Matlab simulation by anti-filtering software can show the before and after aliasingeffect.The aim of the soft data processing is to display data collection, so a appropriatedata processing software is required, then showed the waveform of the surfaceroughness data, so as to get filtering midline. At last, get workpiece surfaceroughness profile and assess the roughness parameters. Experimental analysis shows that the system could finish network data collection of surface roughness.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on Physical Properties and Data Processing in the Process of Removing Acid of LNG,TE644
  3. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  4. Research on Cooperative Orbit Determination in Satellite Network Based on Multi-Agent System Theory,V474
  5. The Inductive Load Based Vehicle Body Network Control System,U463.6
  6. The Electric Power Steering System,U463.4
  7. Research and Application of the Integrated Experimental System for Low-Voltage Power Line Carrier Communication,TM73
  8. Research on Fault Detection and Network Reconfiguration Algorithms for Distribution Network,TM727
  9. Research on Stability of Hierarchical Sattellite Network,TN927.23
  10. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  11. Study on Virtual Detector of Infrared Hyper-Spectral Image,TP391.41
  12. Research on Text Classification Based on Biomimetic Pattern Recongnition,TP391.1
  13. FPGA/DSP Image Co-processor Technology and Ethernet Data Transmission,TP391.41
  14. The Research of Moving Object Tracking System Based on Embeded Image Process Unit,TP391.41
  15. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  16. Research of Visual Servoing in 4-DOF Robotic Manipulator,TP242.6
  17. Research on Visual Servo System of Mechanical ARM,TP242.6
  18. Design of Weapon Detection Device Control System,TP183
  19. On Explanatory Power of Conceptual Integration Theory for the Ttanslation of Chinese Ancient Classic Through the Analysis of the English Versions of Tao Te Ching,H315.9
  20. A Study about the Development of the Domestic Affiliate Marketing,G206
  21. Municipal tourism land use planning environmental impact assessment,X820.3

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile