Dissertation > Excellent graduate degree dissertation topics show

Development of High-flow Servovalve Overlap Value Hydraulic Measuring System

Author: ZhaoEnDong
Tutor: ShaoDongXiang
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: high-flow servo valve overlap value measuring spool valve
CLC: TP274
Type: Master's thesis
Year: 2012
Downloads: 36
Quote: 0
Read: Download Dissertation

Abstract


As servo valve is used as a central component which converts the weakcurrent into high power hydraulic control in the electric-hydraulic servo-systems,its current-fluid signal has a decisive effect on the control accuracy of the wholeelectric-hydraulic servo-system. Recently, because higher power and controlaccuracy requirement is raised to the performance of electric-hydraulic servo-system, the current-fluid conversion range and linearity of servo valve need to beimproved. And the size and symmetry of the overlap of spool valve exerts a vitalinfluence on the linear characteristic of servo valve. The overlaps need accuratemeasurement to achieve high accuracy.Firstly, this dissertation introduces the hydraulic measurement theory of thehigh-flow servo valve overlap, establishes the real spool valve model andanalyzes the theory error and repeatability error.Secondly, the dissertation gives the whole design scheme which consists ofhardware and software based on the measurement theory. Then the hardware isdesigned before the software is developed. The hardware platform is made up ofthe mechanical fixture part, the hydraulic part, the electro-circuit part and the IPCpart. Among them, the mechanical fixture part can not only locate and clamp thespool valve, but also make the spool axially movable; The hydraulic part whichprovides the system with measuring medium includes measuring circuit,hydraulic manifold block, pump unit and so on; The electro-circuit part whichaims at transmitting, adjusting and showing the signal from the transmitters andsensors; The IPC part is in charge of other equipments, which includes IPC，various data acquisition cards and control cards. This dissertation adopts VC++programming language in the VS2005programming environment and uses dataacquisition, multithreading and database technology etc.Finally, the dissertation not only debugs the measuring system including thedisplacement calibration and program debugging, but also measures the overlapof the sample. After collecting and analyzing the test outcomes, the dissertationconcludes that this test system can measure the overlap value automatically andrepeatability precision and measuring precision meet the design requirement.

Related Dissertations

  1. New tamping unit design and characteristics of electro-hydraulic shaker,U216.6
  2. Strategy dual spool hydraulic excavator control system,TU621
  3. Based the dual spool excavator boom control system characteristics and energy efficiency research,TU621
  4. Simulation Research on Effect of Edge Geometric Error of Valve Orifices to Spool Valve Characteristic,TH137.52
  5. Research and Development of Testing Platform for Pneumatic Measuremet of Valve Error Based on Electromagnetic Theory,TP216
  6. CFD Simulation and Analysis of Flow Fluid of Spool Valve of Φ8Diameter Electro-hydraulic Servo Valve,TH137.52
  7. Visual Research for the Flow Field on a Explosion-proof Bidirectional Solenoid Directional Control Valve,TD684
  8. Simulation of Spool Valve with Notches Based on Fluent,TH137.52
  9. Research on Characteristics and Numerical Simulation of Flow Field of the Anomalous Orifice Spool Valve,TH137.52
  10. Research on the Characteristics of the Orifice of the Hydraulic Spool Valve,TH137.51
  11. Simulation and Analysis of Flow Ifeld of Non-circular Opening Spool Valve Based on CFD,TH137.52
  12. The Study on Multi-Point Forming Press and Its Key Components Used in Adjusting Elements,TG385
  13. CFD Study for the Flow Field Inside the Hydraulic Spool Valve Considering of the Movement of Valve Element,TH137.52
  14. Investigation into Flow Coefficient of Orifice and Calculation of Steady Flow Force of Spool Valve with Notches,TH137.52
  15. The Design of the Dual-Camera High-Speed Synchronous Capturing System Based on Gigabit Ethernet,TP274.2
  16. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  17. Gui Design and Application Oriented to Embedded Ultrasonic Detecting System,TP274.53
  18. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  19. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  20. LXI-VXI Adapter Design,TP274
  21. Development of Vxibus Common Interface Module Based on DSP,TP274

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system
© 2012 www.DissertationTopic.Net  Mobile