Dissertation > Excellent graduate degree dissertation topics show

Preparation and Properties Study on Highly Filled EVA Functional Composite Film

Author: SunLin
Tutor: LiBin；ChengYongFeng
School: East China University of Science and Technology
Course: Materials Engineering
Keywords: EVA Highly Filled Functional Composite Film Property
CLC: TB383.2
Type: Master's thesis
Year: 2012
Downloads: 142
Quote: 0
Read: Download Dissertation

Abstract


As a new type of solar cell encapsulation materials, Ethylene vinyl acetate copolymer (EVA) film comes to crosslink during packaging, and finally forms the gel which has homogeneous structure, high light transmission and good sealing; in the PV modules, the film in using process can effectively prevent the crystalline silicon cells from being corroded by gas, water, dust, etc. EVA film has a poor thermal conductivity, in the process of service, high temperature and ultraviolet easily maked it age. Through adding thermal conductive and insulating fillers, some properties of composite film could be effectively improved, such as the thermal conductivity, and the temperature of the battery module would be reduced; but with the increase of filling quantity, the processing and molding of film were difficult.This article mainly studied the preparation and properties of highly filled EVA functional composite film.To achieve the preparation of highly filled film which fitted for the requirements of the packaging, through the study of rheological properties and the optimization of molding process, and the action of liquidity of composite system was improved. Finally the composite film with uniform thickness could be prepared by hot pressing molding method, etc, and the volume content of the filler could as high as 0.5.By testing the heat-conducting and insulating property of filling system, and the results showed that the thermal conductivity of composite film got very good ascension, and its insulation performance didn’t distinctly drop after the filling, so the modification of film with functional fillers is successful. During the study of the mechanical properties、adhesive properties and the thermal stability of the film, it was found that in a certain range of filler content, the adhesive properties could meet packaging requirements, and the thermal stability improved.The tensile strengths and tensile elongation of composite film decreased.

Related Dissertations

  1. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  2. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  3. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  4. The Prokaryotic Expression of Melittin Gene and Its Targeting Transcription in Hela Cells,R346
  5. Dry Eye Patients Dalian Ophthalmology Out Patient Department Survey,R777
  6. Attribute structure of cognitive diagnosis completeness and accuracy,B842.1
  7. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  8. Infringement of the right to life caused by a third party damages System,D923.1
  9. The Research of the Yibai Zhang’s City Movie on Creation,J905
  10. Study on Process of RE-boronizing for Q235 Steel and Boride Layer Anti-corosion Property in Aluminum Melt,TG156.87
  11. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  12. On the \,D923;F293.3
  13. Research on Virtual Property,D923
  14. The Rhythm of Chinese Feature Films,G222
  15. Research and Implementation of Pedestrian Detection in Video Images,TP391.41
  16. Space right to the basic theoretical research,D923.2
  17. Confirming Non-infringing Intellectual Property Lawsuit Study in China,D925.1
  18. Going to Benefit Sharing of Intellectual Property,D923.4
  19. Intellectual Property Abuse and Legal Regulation,D923.4
  20. The Study on the Intellectual Property Right Protection of Hubei Mashroom Industy,F204
  21. Evaluation of Intellectual Property Damages,D923.4

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile