Dissertation > Excellent graduate degree dissertation topics show

Research on the Direct Torque Control of Brushless Doubly-Fed Machine

Author: WuZuo
Tutor: LiGuangZhong；XiaoQiangZuo
School: Hunan University
Course: Power Electronics and Power Drives
Keywords: Brushless Double-Fed Machine Direct Torque Control Torque ripple
CLC: TM34
Type: Master's thesis
Year: 2011
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


Now, a large number of applied AC machines are mainly the synchronous machines and induction machines. Generally, synchronous machine and induction machine can not be used together because of the structural differences. The brushless Doubly-Fed machine(BDFM) not only has a simple structure of rotor cage, but also has the fine characteristics of the wound rotor induction machine and synchronous machine that can operate on both the synchronous and asynchronous status, not only can be used as an adjusting-speed machine, but also as a variable-speed constant-frequency(VSCF) generator, and the doubly-fed electricity can be realized under the brushless case.This paper introduces the BDFM the working principle and operation mode,next derive the network mathematical models and d-qmathematical models of the wound-rotor BDFM,and the simulation model based on d-q reference frame is established. Basic on Matlab / simulink modeling, simulation and experimental methods to analyze several operating modes in the open-loop characteristics, the results of the simulation test results analysis, closed-loop control BDFM study provides an important the oretical basis and valuable conclusions.Then create voltage and current mathematical equation, torque control is derived matrix,and in the use of Matlab / Simulink model of BDFM control the use of closed-loop direct torque control simulation, the simulation results are analyzed. The results showed that: direct torque control than the vector control is relatively less online computation, the direct torque control is relatively simple, the speed and torque response speed is relatively fast. In this paper, direct torque control method, as applied to the actual provision of a theoretical basis..Direct Torque Control of torque ripple on the great influence on their own, this article torque ripple of digital systems and processes of the production of mathematical analysis method, indicating an important factor in generating a torque ripple and torque of the sampling time hysteresis width. BDFM direct torque control performance improvement can be effectively broken down by vector method, optimization method and the improved switching table torque hysteresis comparator method, to achieve the purpose of reducing torque ripple.Finally, a summary about the thesis is made. Some suggestion is proposed for next work.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. The Research of Induction Motor Direct Torque Control System Base on Intelligent Sliding Mode,TM343
  3. Speed-Sensorless Direct Torque Control System of Induction Motors’ Design and Implementation,TM343
  4. AC motor direct torque control technology research and simulation,TM34
  5. Observer-based brushless DC motor control method,TM33
  6. Induction Motor Direct Torque Control System Design and Research,TM343
  7. Research on AC Asynchronous Drive Controller of EV,TM343
  8. Research on Direct Torque Control of Permanent Magnet Synchronous Motor for Electric Vehicle,TM341
  9. Study and Simulation of Start and Power Generation about Induction Motor,TM343.2
  10. Research on Direct Torque Control for Brushless Doubly-fed VSCF Wind Power Generator,TM315
  11. Direct Torque Control of Brushless DC Motor,TM33
  12. Asynchronous Motor Direct Torque Control in the Application of Variable Frequency Control Pumping Unit,TM921.51
  13. Research and Simulation on Synchronous Traction System of High-Speed Train,U260.13
  14. Design and implementation of direct torque control single inverter drive system based on multi-machine,TM921.5
  15. Sensor-less Direct Torque Control of Doubly Fed Induction Wind Generator,TM315
  16. Parameter Identification of Permanent Magnet Synchronous Motor Direct Torque Control System,TM341
  17. Research on Strategy of Torque Ripple Minimization of Hybrid Excitation Switched Reluctance Motor,TM352
  18. The Research on the Sensorless Operation for Direct Torque Control of PMSM Based on DSP,TM341
  19. Studies on Intelligent Control Technology for Wind Turbines,TP273
  20. Application and Research of Chaos Artificial Fish Algorithm in DTC System,TP273.5
  21. Research on Asynchronous Motor Direct Torque Control Based on SVPWM,TM343

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor
© 2012 www.DissertationTopic.Net  Mobile