Dissertation > Excellent graduate degree dissertation topics show
Research and Design on the Quality Control Device for the Distribution Systems
Author: ZhangZhenHai
Tutor: WangYuFeng
School: Liaoning Technical University
Course: Motor and electrical
Keywords: Detection and Control Algorithm DFT Sliding Window Iterative Combined Harmonic Control Algorithm Harmonic Power Supply
CLC: TM76
Type: Master's thesis
Year: 2011
Downloads: 78
Quote: 1
Read: Download Dissertation
Abstract
|
The active power filter (APF) is considered to be the most effective way to manage the power grid harmonic wave compared with fixed passive filter at present, but its detection and control method are not the best.The APF model machine is developed totally, which is not only used to prove the detection and control algorithm refered by this paper but also can be used by other algorithm. And thus, it is very convenient to update the algorithm and system. For recently there is no complete APF system simulation, an complete APF simulation model is built, which is more of integrality and accuracy compared with blocking part simulation. What’s more, the simulation code is very convenient to transplant to DSP platform. On the harmonic detection algorithm aspect, The discrete fourier transform (DFT) sliding window iterative based on coordinate transformation is put forward after comparing various kinds of algorithms. The simulation result proves that this algorithm is of fast detection speed and with less tracing error. On the harmonic current compensation aspect, harmonic current hysteresis controlling is popular in practice. But the APF machine produced this algorithm output waveform with more noise, moreover the IGBT switched with high frequency, this is bad to the grid compensation. For this phenomenon, a combined harmonic control algorithm is put out, which is combined with recursive integral PI algorithm and sliding-mode control algorithm. This combined control algorithm not only reduces the APF switch noise but also improve the robustness and accuracy.At present, it is not very convenient for the APF development and improvement for the machine should be put into practice to check the compensation result. So it is necessary to develop and harmonic power supply to simulate the real polluted grid, and it is flexible to produce any harmonic overlying the fundamental wave. The harmonic power supply is produced by the project, which reduced the APF construction cycle significantly.The lab APF model machine is designed and researched at the last part of the paper, with the core of digital control system based on DSP(TMS320F2812)+CPLD(EPM3256ATC144). The photographs and experiment waveforms are presented in the paper to prove the harmonic detection and control algorithms are correct.
|
Related Dissertations
- TM5 of MPEG (Rate Control) algorithm based on the PCI bus by sweeping video capture system hardware design,TP274.2
- Substation Integrated Early Warning System and Application,TM76
- Design of Power Quality Monitoring System Based on LabVIEW,TM76
- Research on GPRS-Based Long-Distanceautomatic Meter Reading System,TM76
- Development and Application of the Closed Loop Decision Support System of Zhongshan Distribution Network,TM76
- Research and Application on Fault Location and Online Monitoring System of Distribution Network,TM76
- The Analysis on the Feasibility of Intelligent Substation in Hengqin Island,TM76
- Based on IEC61850 the Sanxiang Substation Engineering Application,TM76
- Research on Monitoring System of Remote Video and Environment in Intelligent Substation,TM76
- Research on the Best Practical Mode of Distribution Automation in Regional Grid,TM76
- The Planning of JiangMen Distribution Automation Systems Based on the Analytic Hierarchy Process,TM76
- Intelligent Substation Experimental Platform for Simulation and Evaluation,TM76
- The Research and Design of the Substation Programmed Control Software Based on Video Monitoring System,TM63;TM76
- Research on the Construction and Operation of Secondary System in Regional Intelligent Grid,TM76
- Renewable Energy Source Model and Message Research Based on IEC61968,TM76
- Construction and Application of Customer Power Information Gathering System in Smart Grid,TM76
- Short-circuit Isolate System in Distribution Network Based on Topology Division,TM76
- Embedded systems based on fiber-optic signal analyzer design and research,TM76
- Power Load Management System Design and Implementation,TM76
- Research on the Application of Digital Substation,TM76
- Design and Implementation of Wireless Monitoring System for SF6 in High Voltage Switch Room,TM76
- Research and Application of Digital Measurement-Control Circuit for the Substation Secondary,TM76
CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation
© 2012 www.DissertationTopic.Net Mobile
|