Dissertation > Excellent graduate degree dissertation topics show

Research on Planar Passive Integration of EMI Filter for Switch Mode Power Supplies

Author: WangChangHua
Tutor: YangYuGang
School: Liaoning Technical University
Course: Power Electronics and Power Drives
Keywords: EMI filter planar passive integration stacked-type interleaved connection structure of integrated L-C planar-array
CLC: TN86
Type: Master's thesis
Year: 2011
Downloads: 110
Quote: 0
Read: Download Dissertation

Abstract


Because of more frequent switching action of SMPS(Switch Mode Power Supplies). EMI (electromagnetic interference) becomes more worsen. To suppress the inducted EMI, EMI filter is used between the power line and the input of converter.However, for conventional discrete EMI filters, its large volume and low space utilization decrease the power density of SMPS; additionally, the parasitic parameters of discrete components worsen the HF (high-frequency) characteristic. To solve these issues and overcome the difficulty of integration capacitances with low relative permittivity dielectric material. A structure of planar passive integrated EMI filter basing on L-C windings stacked-type interleaved connection is proposed in the paper, common mode and differential mode inductors, common mode capacitances and partial differential capacitances are integrated into a planar core with PCB windings and structrue of integrated L-C. On this basis, according to the frequency range of differential mode noise, differential mode capacitance is integrated with X7R. Completely structure of planar integrated EMI filter is achieved. Differential mode and common mode equivalent circuits of high frequency are established, the feasibility and validation are verified by theoretical analysis, simulation and experiments.To improve the characteristic of integrated EMI filter, ESL is eliminated with loop inductance of input and output. Giving approaches to eliminate EPC, analyzing impacts of the coupling coefficient and the embedded ground to eliminate EPC. Finally, carrying out by Pspice simulation.To overcome the difficulty to adjust and achieve differential mode inductances of integrated EMI filter, planar EE core is splited vertically from the center pillar, planar-array integrated EMI filter structure is proposed in this paper. Pointing out advantages of the integrated structure by theoretical analysis and simulation. Finally, analysing the performance stability of integrated EMI filter from characteristics of temperature and frequency of materials, which provide references to select materials for passive integrated EMI filter.

Related Dissertations

  1. 10kHz ~ 2GHz micro- moment density filter array plate Test System,TN713
  2. Improvement of Planar Passive Integration Structure for LLC Resonant Converter,TM46
  3. 3kW Completely-integrated EMI Filter Based on Flexible Multi-layer Foil,TN713
  4. Research of Planar Passive Integration for LLC Resonant Converter,TM46
  5. Research on Planar Passive Integration for EMI Filter of Switching Mode Power Supplies,TN713
  6. The Research on Two-phase Interleaved Planar Passive Intergration in VRM,TM46
  7. Applied Research of the Variable Structural Control in the Magnetic Array Integrated Voltage Regulator Modules,TM46
  8. Study of EMI Filter for Switch Mode Power Supply,TN713
  9. Research on the Numerical Experiment of Strength Assessment of Ship Equipment and Component Subjected to Shock Load,U661.43
  10. Research on High-speed Switched Reluctance Motor of the Structure of 6/4,TM352
  11. Parasitic effects of EMI filters,TN713
  12. The Design and Research of Single-stage PFC Flyback LED Driver,TN312.8
  13. Characterization and Cancellation of Parasitic Parameters for EMI Filters,TN713
  14. Design of a PFC Controller with Dual-Output Function and No Multiplier,TM46
  15. Research on 200W LED Driver,TM46
  16. Research on Planar EMI Filter Based on Circular Integrated LC Component,TN713
  17. The Design of Passive Planar Integrated EMI Filter Consisted of Integrated LC Structure,TN713
  18. The dual-band and dual-polarized planar antenna research,TN822
  19. Development of multilayer chip EMI filter,TN713
  20. Based on USB2.0 area array image data transmission technology research,TP274.2
  21. Modeling of Large Scale Terrain and Optimization of Rendering Efficiency for Free and Whole Roaming,TP391.41

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Power supply
© 2012 www.DissertationTopic.Net  Mobile