Dissertation > Excellent graduate degree dissertation topics show

The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement

Author: XieZhiTao
Tutor: RenZhengYi
School: Harbin Engineering University
Course: Mechanical Design and Theory
Keywords: pumping center dynamics performance optimization design flywheel power-saving
CLC: TE933.1
Type: Master's thesis
Year: 2011
Downloads: 4
Quote: 0
Read: Download Dissertation


Pumping units are important drives on the ground of pumping system in oil field, are the main component of "Three Smoke" system. In the rod pumping system, because there exist in the pumping units, such as large fluctuate of loads, the inhomogeneity of the alternating loads of the pumping units will inevitably lead to instability of the transmission performance, therefore, the study of a machine of regional concentration of the pumping center unit, has important practical significance.This thesis analyzes the distribution of some oil wells in Daqing oil field and the form of rod pumping loads showing the characteristics of simple harmonic motion, uses the phase change characteristics of the pumping system loads variation, reveals the working principle of the pumping cente units, The general plan is desigened according to the machine with the six oil wells.To solve the power-saving and consumption-reducing in the pumping system, The pumping cente units made the kinematics and dynamics performance models applied by dynamic analysis theories and methods, influence on the pumping cente units kinematic and dynamic features which caused by different stroke.stroke changes.institution size and the rod loads are alalyzed. To improve the oil center system performance, optimize the structural design and improvement is provided a theoretical basis. In order to reduce the motor output shaft angular velocity fluctuations, an equipment is designed on the shaft of motor to add up the moment of inertia, therefore the asynchronous motor matches with the pumping working, and motor working condition is improved.Finally, combined with mechanical optimization design theory, the pumping cente units made structure size optimization design, and the optimum before and after the kinematics and dynamics performance parameters are analysed and compared, improved kinematic and dynamic performance of the pumping center units system.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  4. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  5. The turbofan engine pneumatic runner Optimization Approach,V235.13
  6. The Optimization Design and Discusses of Weft Flexible Complex Stab-Resistant Layers,TS186.2
  7. Study of Dynamic Simulation Experimentation on Flexible Power Conditioner Based on Flywheel Energy Storage,TM761.1
  8. Research on Utilization Technique of Regenerating Braking Energy in Urban Rail Traction System,TM922.3
  9. Flywheel electric vehicle charging station key technologies,U469.72
  10. Vertical discrete magnetic rotor flywheel battery - Bearing System Design and Simulation,TM919
  11. Vertical Flywheel Magnetic Bearing μ controller design and simulation,TM919
  12. Structure Analysis and Optimization of a Reducer,TH132.46
  13. Failure Analysis and Processing Technology Improvement of the Bicycle Flywheel Parts and Its Molding Die,U484
  14. Concrete Tied Arch nonlinear mixed- discrete variables optimization design,U448.225
  15. Study on Designing Agricultural Product Supply Chain Network,F323.7
  16. Sedan automatic transmission flywheel warm press forging research,U463.212
  17. Optimization Design of Reinforced Structural for Sheared Ringent Composite Laminate,TB33
  18. Plastic Mold Design of the Automobile Plastic Box Based on the CAD/CAE Software,U463.83;TP391.7
  19. Structural Strength and Vibration Analysis of the Turbo-generator Stator,TM311
  20. Study on Optimization Design of Electric Power Line Based on Visualization Technology,TM75

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Oil and gas production machinery and equipment > Pumping mechanical equipment > Pumping
© 2012 www.DissertationTopic.Net  Mobile