Dissertation > Excellent graduate degree dissertation topics show

Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability

Author: WangZhiJia
Tutor: ChenYing
School: Beijing Institute of Clothing Technology
Course: Textile Chemistry and Dyeing and Finishing Engineering
Keywords: PSA coating water-dispersible polyurethane water resistance moisture permeability low-pressure plasma air pressure plasma
CLC: TS195.6
Type: Master's thesis
Year: 2012
Downloads: 19
Quote: 0
Read: Download Dissertation


In this study, Moisture permeability could be significantly improved by adding carboxymethyl cellulose (CMC) into water-dispersible polyurethane on Polysulfonamide (PSA)/cotton blend fabric (50/50). It was found that different parameters, such as amount of carboxymethyl cellulose (CMC) additive, thicknesses of coating, temperature and time of curing, could influence coating effects of water resistance and moisture permeability, and that optimum conditions were with 0.35% of CMC additive, a coating thickness of 100μm and a curing temperature of 130℃and a heating time of 3min after orthogonal experiment. Under these conditions above, moisture permeability could be up to 3422g/m~2·24h, air permeability was 1.68 L/m~2·s, and water resistance could be at 5 grade.Pressure plasma was applied to change surface properties of fabric and make fabric be coated successfully with lower viscosity of coating agent. Coating properties could also be affected by different processing times, discharge powers and working pressures. The fabric was treated with a low temperature argon-plasma, at a gas pressure of 25Pa and a discharge power of 50W for 30s. After coating with low pressure plasma treatments, the moisture permeability increased from 3422g/m~2·24h to 6594g/m~2·24h and the air permeability increased from 1.68 L/m~2·s to 17.80 L/m~2·s, while the water resistance remained stable at grade 5. Besides, the fabric was treated with a air pressure plasma, at a discharge power of 500W for 2.8min, and then the moisture permeability increased to 5943g/m~2·24h and the air permeability increased to 16.8 L/m~2·s, while the water resistance remained stable at grade 5.Additives such as CMC and sodium alginate (ALG) could improve moisture permeability of coated fabric by adding them into water-dispersible polyurethane. CMC was generally superior to ALG, and CMC-containing water-dispersible polyurethane with adding polyethylene glycol (PEG) could dramatically improve moisture permeability and handle of coated fabric. It was found that under the conditioin with 0.25% CMC and 10% PEG, moisture permeability could be up to 6722g/m~2·24h, and that air permeability was 12.8 L/m~2·s and that water resistance could be at 5 grade and that bending length of coated fabrics turned to be 5.51cm.When the quantity of adhesive dispensed on PSA/cotton blend fabric was 41.5g/m~2, the moisture permeability of this laminated fabric could be up to 8281g/m~2·24h and hydrostatic pressure value was up to 1050 cmH2O. Besides, this laminated fabric had great flame retardant performance.

Related Dissertations

  1. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. A Study on the Electrodeposition of Zn-Co and Zn-Ni Alloys in the Reline Room Temperature Ionic Liquid,TQ153.1
  4. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  5. Preparation and Performance of V2O5-WO3/MOx/Cordierite Catalyst Modified with Cu、Mn、Ce for DeNOx,X701
  6. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  7. Anti-corrosion Property of Flake Zinc Epoxy Coating Doped with Rare Earth in SRB,TQ630.1
  8. Study on Chitosan-Based Composiate Nano-Coating Dope and Its Effect of Fresh-Keeping for Coated Egg,TS253.2
  9. Development and Application of Biological Seed Coating Formulation for Soybean,S565.1
  10. Preparation of polyaniline nanostructures , characterization and biomedical applications,TB383.1
  11. Research on Microstructures and Properties of FeMnCrNiAlBSi/Cr3C2 Coatings,TG174.44
  12. Studies of Plasma Spray Metal-Ceramic Compounds Coatings on Q245r Steels,TG174.44
  13. Investigation of Plasma Sprayed NiCr-Cr3C2 Coating on Mould CrZrCu Alloy Plates,TG174.442
  14. Study on the Silicone Modified Acrylic and Water-borne Anti-corrosion Coatings,TQ637
  15. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  16. The Study of Sodium Alginate Film Coating for the Fresh-keeping of Mango Fruit,TS255.3
  17. Design and Optimize of LED Packaging Process,TN312.8
  18. Development and Application of Insulation-Colling Coating for Outdoor Textile,TQ630.7
  19. The Study on Controllable Preparation and Performance of Polyurethane Nano-fiber/net,TB383.1
  20. Research on Bacterial-Cellulose Coating Small-Caliber Artificial Blood Vessel,TS106.67

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > Dyeing and finishing industry > Finishing > The finishing of a variety of fiber and its products
© 2012 www.DissertationTopic.Net  Mobile