Dissertation > Excellent graduate degree dissertation topics show

Design of Contactless Power Transfer System for Lithium-ion Batteries

Author: HuXinFu
Tutor: NingGengXin；ChenLiangWu
School: South China University of Technology
Course: Electronics and Communication Engineering
Keywords: Li-ion battery Contactless charging windings
CLC: TM912
Type: Master's thesis
Year: 2011
Downloads: 447
Quote: 1
Read: Download Dissertation

Abstract


Contactless power transfer is a new way to transfer energy,it can develop out the contactless charging equipment in different directions and different places,it can get rid of the restriction of the traditional cables,has a promising prospect.It’s development makes the grown-up and perfection of this kind of equipment.On the basis of what introduced the current studying situation of contactless power transfer technology,Analyze the lithium-ion battery’s electrical characteristic and the battery charging pattern and the security issue.In particular,analyze and design the circuit of the power sending and power receiving,lithium-ion battery pack and the charge management IC.It realized the purpose that the medium and small sized power equipment for wireless power supply. It provides a wireless power technology example for application of design of contactless charging platform in portable electronics products.Finally,summarizing main works of the thesis,clarifying the value and significance of this research.

Related Dissertations

  1. The Study of Li-rich Layered Solid-Solution Cathode Materials for Lithium Ion Batteries,TM912
  2. BYD lithium battery production operations Improvement,F426.6
  3. Parameterization Design and Research of Permanent Magnet Synchronous with Fractional-slot and Concentrated Winding,TM341
  4. Research on High Voltage Large Capacity Alternate Active Power Filters,TN713.8
  5. Research on Frequency Characteristic of Large Conductor Impedance,TM934
  6. Bearingless induction motors Nonlinear Decoupling Control of,TM343
  7. Analysis and Research on Winding Losses of Magnetic Components in Switching Power Supply,TM461
  8. AC motor winding Computer Aided Analysis and Design,TP391.7
  9. The polymer gel electrolyte of the lithium ion battery research,TM911
  10. Fault Analysis and Maintenance Decision of Turbine Generator Rotor Windings,TM311
  11. Analysis and Diagnosis on the Internal Faults in Stator Windings of the Synchronous Machine,TM341
  12. Numerical Simulation and Experiment For The Inner Evaporative Cooling System Of Generator Stators,TM311
  13. Measurement of Impulse Voltage Distribution of Transformer Winding,TM406
  14. Low-Speed High Torque Direct Drive Permanent-Magnet Brushless Motor,TM351
  15. Design of Adjusting Speed Synchronous Motor Series TDZBS,TM341
  16. Battery Management System of Li-ion Battery for Hybrid Electric Vehicle,TM912
  17. Design and Research on a Novel Arc-Suppression Coil Based on Magnetic Flux Controllable,TM55
  18. Studies on the Preparation and Application of Carbon and ZnO/C Porous Microspheres as Anode Materials of Li-ion Batteries,TM910.4
  19. 100kW wind turbine design and hybrid excitation reactance parameter calculation,TM341
  20. 5V lithium-ion battery cathode material preparation and electrochemical properties of,TM912
  21. Analyse of Armature Reaction Impact on Permanent Magnets of Pmsm with Fractional Slot Concentrated Windings,TM341

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Battery
© 2012 www.DissertationTopic.Net  Mobile