Dissertation > Excellent graduate degree dissertation topics show

Finite Element Analysis and Optimization Design of a Tractor Cab

Author: LiuYun
Tutor: ZuoXingDong;ShiQingChun
School: Nanjing Agricultural College
Course: Mechanical Design and Theory
Keywords: tractor cab FEM strength analysis modal analysis structural optimization design
CLC: S219.02
Type: Master's thesis
Year: 2010
Downloads: 16
Quote: 0
Read: Download Dissertation

Abstract


As society progresses, people requires not only high efficiency, but also that the security requirements are riser and riser as well in labor and production. According to this view, this paper applies the finite element theory to the design of tractor cab and allows the driver to work safely.A model of the tractor cab is established by using CAD software Pro/Engineer. A finite element model is achieved with the help of pre--processor and post-processor software ALTAIR/HYPERMESH. The static test process is simulated in the situation of rear-pushing, rear-crushing, side-pushing, front-crushing and front-pushing by ANSYS. The analysis result indicates that the stress of the cab is less than the utmost intension. And the cab meets the design. Secondly, the modal analysis of the cab is carried out. And modes of the modal vibration and corresponding natural frequencies are calculated. The local intensity of the cab is considered through the frequencies and modes. Finally, a parametric model of the cab’s components is established. And the optimized thicknesses of the cab’s components are achieved with thinking the thicknesses as design variables and the total mass of the cab as the design objective. The result indicates that the weight of the cab is decreased and the raw material of the cab is saved.This study shows that the finite element method and ANSYS software provide a set of good basic theory and method for the cab’s structural and dynamic characteristic simulation and optimization designs, which not only lay the foundation for the tractor’s vibration, fatigue, noise and so on, but also provide a guiding significance for practice to the factory.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  4. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  5. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  6. Undersea robot plow trenching machine design and analysis,TE952
  7. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  8. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  9. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  10. Design and Simulation of Hot Precision Forging Die for Spur Bevel Gear,TH132.41
  11. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  12. Study on Stamping-forging Process and Experiment of Sheet Metal Parts with Non-uniform Thickness,TG386
  13. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  14. Research on Vibro-acoustic Behavior of a Cabin Model with Floating-raft System,U661.44
  15. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  16. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  17. Experimental Analysis of Boom Vibration and Stress Calculation of Pipe for 46D Truck-mounted Concrete Pump,TU646
  18. Study on Aseismic of Frame Structure with Weakness Story at Bottom Considering Filled-wall Influence,TU352.11
  19. Grooves on the surface of the impact of packaging interfacial thermal resistance,TN605
  20. Large aperture telescope primary mirror side support structure optimization,TH751

CLC: > Agricultural Sciences > Agricultural Engineering > Agricultural power,rural energy > Tractor > General issues > Design, calculations,drawings
© 2012 www.DissertationTopic.Net  Mobile