Dissertation > Excellent graduate degree dissertation topics show

The Tin Coating Discoloration and Solderability Study in Lead Frame

Author: YangYiWu
Tutor: ZhangLiJun
School: Suzhou University
Course: IC
Keywords: Semiconductor Lead Frame Tin Coating Solderability Tin coating discoloration Passivation
CLC: TN305
Type: Master's thesis
Year: 2011
Downloads: 40
Quote: 0
Read: Download Dissertation

Abstract


Currently in the semiconductor packaging process,the die chip connect with Lead frame pin by the chip interconnect to achieve the one step package,and after Trim/Form chip connect with the substrate(PCB board) by the soldering process. Before this process,plating a pure tin coating in the chip lead frame surface to increase the soldering capacity between the pin and the substrate.The performance of lead frame tin coating directly affects the solderability,and whether the tin coating discolor will determine the quality of the tin coating in the lead frame. In the industrial practice ,the tin coating discolor that affect the solderability is main reason for the chip failure.In this paper,the pure tin plating technology in the lead frame surface was introduce .Analysis the cause of two kinds of the tin coating discoloration ,and propose the solution for the two kinds of discoloration.After this paper study ,the tin coating discoloration have been resolved,ensure that the chip with the good solderability. This Paper proposed solutions for the semiconductor chip and package substrate solderability provide useful help and reference information.

Related Dissertations

  1. Research of A Practical Nanosecond High-voltage Pulse Power Source,TM46
  2. PiN junction -state characteristics of,TN312.4
  3. Oriented data integration and analysis of defects in the semiconductor manufacturing process,TN305
  4. 600V VDMOS power device process optimization study,TN386
  5. Research on Drive Control Technology of High Accuracy Semiconductor Illuminant Based on ARM,TN36
  6. Passivation layer on the power device chip electrical parameters affect the simulation analysis and process optimization,TN386.1
  7. Study on the Structure and Electronic States at the Interface between Organic and Inorganic Semiconductors,TN304
  8. 0.13μm IC lithography process platform optimization and lithography resolution enhancement technology research,TN305.7
  9. Investigations on V-doped ZnO by First-principles Calculations,TN304.7
  10. Research and Implementation of Capacity Planning System for Multiple Semiconductor ATM Factories,TN305
  11. Semiconductor lithography equipment real-time monitoring system design and application,TN305.7
  12. Optimization of the Canon lithography machine linewidth of the the Olympus PROTECH2.5D software platform,TN305.7
  13. The queuing policy optimization in semiconductor manufacturing,TN305
  14. First-principles Study on the Heterostructure of BaTiO3-SiC,TN304.01
  15. The Studied of Ohmic Contact on the InGaAsSb Semiconductor Lasers,TN305.93
  16. Synthesis and Photoluminescence Properties of Aligned ZnO Nanowire Arrays by Hydrothermal Synthesis Method,TB383.1
  17. Ethylenediamine-assisted Solvothermal Synthesis of CdxZn1-xS Solid Slutions and Their Photocatalytic Reduction for Nitrobenzene,TB383.1
  18. High-k gate dielectric / semiconductor substrate interface passivation and performance improvements,TN304
  19. All-Optical Logic Gate Using Cross-Gain Modulation of Quantum-Dot Semiconductor Optical Amplifier,TN722
  20. Size and Temperature Dependence of the Band Gap of Semiconductor Materials,TN304
  21. The Experimental Study of Semiconductor Laser Radiation and 5-FU Sustained Release Repressed Oral Malignant Tumor Cell,R739.8

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Semiconductor technology > General issues > The semiconductor device manufacturing process and equipment
© 2012 www.DissertationTopic.Net  Mobile