Dissertation > Excellent graduate degree dissertation topics show

Design and Implementation of the Process Monitoring and Fault Diagnosis for Injection Molding

Author: ZhangZhenZuo
Tutor: ChangYuQing
School: Northeastern University
Course: Control Theory and Control Engineering
Keywords: injection molding process monitoring fault diagnosis C# sub-staged PCA
CLC: TQ320.5
Type: Master's thesis
Year: 2009
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


With the widespread application of advanced control technology in the industrial production course, the size and complexity of production systems is increasing quickly. In the fundamental research aspect, the technology of process monitoring and fault diagnosis, as a important brand of automation, has received a lot of development. Through a variety of industrial field data collection, processing and analysis, the on-line monitoring and fault diagnosis of the industrial field environment and the operational status of equipment and so on can be realized exactly. Consequently, it has increased production efficiency and product quality, enhanced production safety and security, saved energy consumption, enhanced economic efficiency. It has great significance.Injection Molding Machine (IMM) is one of the most important equipment in plastic industry. It has developed rapidly in the control and on-line monitoring technology rather than in the structure and transmission, since it appeared in the 3rd decade of last century. So to realize the on-line monitoring and fault diagnosis of IMM is significant for improvement of plastic product and progress of plastic industry.In this thesis, the process monitoring and fault diagnosis of injection molding has been implemented with C# and based on the production process of HTF58X2 injection molding. And a sub-system is realized based on sub-staged PCA theory. The injection molding process monitoring data is stored by the system management platform in the database through the Siemens S7-400 hardware devices, and then the off-line procedures will be called to deal with the normal state of complete off-line data in the base. The necessary statistics and control limits obtained in the process will be saved in another database. In the process of online monitoring, system platform on one hand, reads real-time sampling data, on the other hand, calls on-line monitoring procedure for processing real-time data to compare the statistics generated with the corresponding control limits in the database and maps the real-time curves. The fault diagnosis platform calls fault diagnosis procedure for processing real-time data to compare the statistics generated with the corresponding off-line control limits in the database. Due to the comparing, the variables making the system disorder will be decided.The system is an open platform, in addition to the PCA method in this thesis mentioned, other on-line monitoring and fault diagnosis, or the quality of forecasting methods can also be added. So this platform can be achieved in a variety of methods in the process of injection molding research.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. Fault Diagnosis Method Based on Support Vector Machine,TP18
  4. Fault Diagnosis Research on Three-Tank System,TP277
  5. Research on the Key Technology of Waterborne Transport Security System,U698
  6. Analysis of the Injection Molding and Mold Design of the Small Car Plastic Parts,TQ320.662
  7. The Design and Implementation of Tactical Teaching and Training System for Detachment,TP311.52
  8. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  9. The Design and Realization of the Rehabilitation Medical Information System,TP311.52
  10. Within the connection developed to detect its mechanical properties of zirconia abutment,R783.6
  11. Research and Implementation based on scientific research management system of institutions . NET,TP311.52
  12. Multi-channel Real-time Online Monitoring System for Polymerizers,TP274
  13. Research on Business Process Integration of Die & Mould Enterprise,TG76
  14. The Research and Application of the State Evaluation Method of Power Generation Equipment,TM621.3
  15. Nonlinear System Fault Diagnosis and Reconstruction Based on Sliding Mode Observers,TP13
  16. The Design of Information System of Power Equipment Current-carrying Faults Diagnosis,TP311.52
  17. The Research on Fault Diagnosis System of Car Suspension,U472.9
  18. Development and Experimental Study about Virtual Instruments of Vibration Test and Analysis System and Combustion Analyzer,TK407
  19. Integration of a variety of signal characteristics of analog circuit fault diagnosis,TN710
  20. Design and Research on Numerical Control Simulation Test-bed of Lifting Hydraulic System,TH702

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile