Dissertation > Excellent graduate degree dissertation topics show

The Fault Diagnosis of a Gearbox System Based on Wavelet Analysis and the Current Signature of the Induction Motor

Author: BaiTianJu
Tutor: ZhaoChunYu
School: Northeastern University
Course: Mechanical and Electronic Engineering
Keywords: wave analysis gearbox transmission system handoff failure diagnosis
CLC: TH165.3
Type: Master's thesis
Year: 2009
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


The gearbox has been widely used as an necessary general components for connection and power transmitting in metal cutting machine, aviation, electric power system, agricultural machine, transport machine, metallurgical and so on. Mechanical. Because equipments become more and more maximization, high efficiency and strength, the failure of gear transmission is very complex and its forms are quite different, the failure diagnosis of gearbox transmission system has practical significance and important value. In the failure diagnosis of gearbox, vibration measurement is the basic means to collect error signals. But in practical applications, it is very hard to achieve good vibration signals because of the fixing difficulties of sensors. Recently, as the improvements of motor speed sensor-less, the motor current is used to make failure diagnosis. The current signal of induction motor can reflect the dynamic characteristics of external loads, through different current value, motor dynamic characteristics of external loads can be predicted.The paper introduces the mechanism of failure diagnosis and some examples based on the method of measuring the current of induction motor. And two signal analysis methods are emphatically present. One is the analysis of effective value, through theoretical derivation and experiments, it is proved that there are relationship between motor frequency, amplitude and loads. The experimental data are studied using wave analysis to show clearly effects. The second analysis of current component based on synchronous reference frame, through arbitrary coordinate system, establish combination loading small signal model of gear transmission system and show the expression of system transfer function. The dynamic characteristics reflecting by motor current signal is shown theoretically, and through wave analysis explain the relationship between load torque and motor current. Thus it is proved that the motor current signal could be used to make failure diagnosis of gearbox.

Related Dissertations

  1. Generator stator winding single-phase ground fault of digital simulation and traveling wave positioning,TM303.3
  2. Design and Characterization of Controllable Linewidth Guided-mode Resonance Filter,TN713
  3. Research and Implementation of ARM-Linux - based power quality analysis,TP316.81
  4. Based on Acoustic Emission Technique Rolling Bearing Fault Diagnosis,U279.3
  5. Simulation and Experiment on Optical Characteristic of Micro-nano Structure in Morpho Scales,Q811
  6. Ship vibration isolation mass transfer characteristics of vibration wave barrier,U661.44
  7. Failure Diagnosis and Control of Submunitions,TJ413.3
  8. Research of Signal Processing Methods on Rotating Machinery Fault Diagnosis,TH165.3
  9. A Theory Based on Wavelet Analysis of the Gray Prediction Method,F830.91
  10. Technical Improvement of Steam Superheater Refractory Lining and Assessment of Tube Life for In-service,TQ241.21
  11. SiO_2 nanoparticles on the application in optical devices,TH74
  12. Fabricaion of Silicon Nanowires and the Optical Properties,TB383.1
  13. Development of Diagnostic Scanner on Powertrain of Plug-in Parallel Hybrid Vehicle,TH165.3
  14. Data Acquisition and Processing Software for Liquid Drop Fingerprint,TP391.41
  15. Dynamic Simulation of Reduction Gearbox Transmission System in Beam-Pumping Unit,TE933.1
  16. The Research of Sensors Based on Surface Plasmon Resonance,TP212
  17. Study on Multi-layer Optic Disk Readout Technology with Confocal Microscopy,TP333.4
  18. Research on the DC Load Fault Diagnosis Method in AUV,U666.7
  19. Time-modulated antenna array Research and Application,TN820.15
  20. Study on Fault-Tolerant Control of Three Phase AC Variable Frequency Drive System,TM921.51

CLC: > Industrial Technology > Machinery and Instrument Industry > Machinery Manufacturing Technology > Flexible manufacturing systems and flexible manufacturing cell > Fault diagnosis and maintenance
© 2012 www.DissertationTopic.Net  Mobile