Dissertation > Excellent graduate degree dissertation topics show

Research on Thickness Control System of Tire Calender

Author: LiuShiGuang
Tutor: QianXiaoLongï¼›ZhaoBing
School: Northeastern University
Course: Control Engineering
Keywords: Rolling production line Thickness control Fuzzy Control
CLC: TP273
Type: Master's thesis
Year: 2009
Downloads: 31
Quote: 0
Read: Download Dissertation


Calender production line to produce steel cord plastic cover product quality is the basis of the quality of the entire tire in the tire production process , the thickness of the steel cord products is a decisive factor in product quality . Therefore , the detection system for controlling the thickness of the rolling mill production line and the corresponding research on improve cords overlying gum product quality , and even has a vital role to improve the safety performance of the tire . This paper first introduces the car tire production process , elaborated on the various components of the rolling production line and rolling machine works . Then the force generated based on the viscoelastic rubber roller , and the deformation of the roller , the cord shift related factors affecting the thickness of the ply , the combination of rheological analysis on a theoretical model for the calendering process , as well as mathematical built rolling production line mode analysis , summed up the the calender system on the specific requirements of the product thickness . Calender thickness control system as well as the thickness measurement system analysis and research requirements ply plastic cover thickness accuracy and uniformity of the technical requirements for the calender control , elaborated BETA - ray thickness measurement system works , thickness data conversion principle , BETA thickness measurement system flow chart hardware structure and mode of operation ; PSIT pneumatic thickness of the upper and lower film thickness measurement system were measured at the same time to do a detailed description . Issue, thickness control for the existence of the original system using the principle of fuzzy control method for controlling the thickness problem . Rolling machine and rolling products for qualitative analysis , while according to the actual situation and conditions in the rolling process to determine the input and output variables of the fuzzy controller . Using fuzzy , fuzzy inference and defuzzification method to determine the quantization factor of the system , the thickness of the control system of fuzzy control , the various parts of the rolling production line control system can adapt to change and to constantly correct controller parameters , which the system output to achieve the desired results . A theoretical analysis and practical test , the results show that when the model parameters change or disturbance change over time within a certain range , the design of the fuzzy controller can effectively thickness of products to detect and adjust to ensure that the system has good properties.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  4. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  5. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  6. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  7. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  8. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  9. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  10. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  11. Optimal Control of Emulsion System in Cold Rolling,TP273
  12. Research on Grinding and Classification Process Control of Sijiaying Concentrator,TP29-A1
  13. Research on pH Value of the Control Technology for Acid-contained Wastewater Integrated Treatment System in Ningxia Hengli,TP273
  14. Study on Industrial Boiler Water Level Control System,TP273
  15. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  16. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  17. Fuzzy Control System Design of Transformer Cooler,TP273.4
  18. The Research and Application of PID Parameters Self-tuning,TP273
  19. Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control,TS103.3
  20. Study on Navigation and Obstacle Avoidance Technique for Auto Guided Vehicle (AGV),TP242
  21. Rolling heating furnace temperature control algorithm design,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile