Dissertation > Excellent graduate degree dissertation topics show

The Preparation and Characterization of Composite Modified Silicone Resin with Low Surface Energy

Author: ShenLiYa
Tutor: WuZuo
School: East China University of Science and Technology
Course: Materials Science and Engineering
Keywords: silicone polymer epoxy resin polyurethane composite modification low surface energy
CLC: TQ324.21
Type: Master's thesis
Year: 2012
Downloads: 244
Quote: 0
Read: Download Dissertation

Abstract


The low surface energy resin is a kind of resin whose coating has low surface tension through a certain molecular configuration. The present common resins are modified fluorocarbon resin and silicone resin which are widely used in marine industry, electric products, building engineering and so on.The traditional method of silicone modification is generally based on physical mixing. Due to the good chemical stability of the group on polymer chain, there is no chemical reaction between the silicone and its modifier, so the microscopical compatibility of composite resin is poor, which reflects the lack of effect modification on the macroscopy. In this study, the silicone was modified by chemical methods which increased the compatibility between the two resins.Kinds of silicone/EP and silicone/PU resins were composite modified by using the epoxy and polyurethane resin as modifiers and silicone resin, silicone rubber and silicone oil as the matrix materials, respectively. The effects of curing agent with different types, percent and formula types on curing performance were investigated, and the optimum formulation was determined. Through infrared spectroscopy (IR), scanning electron microscopy (SEM), dynamic mechanical analyzer (DMA), atomic force microscope (AFM) and contact angle tester were used to investigate the synthesis of copolymers, and the morphologies on the surface and fracture of the coatings without or with different modifiers, glass transition, and the relationship between contact angle and hydrophobicity or surface energy were studied.The result showed a good micro-compatibility between the silicone resin and modifier. In certain scope, the greater the surface roughness of composite copolymer was, the smaller the surface energy would be, the better hydrophobicity would be, and the greater the contact angle would be; the micro-compatibility was worse between the silicone rubber(or silicone oil) and PU, the fracture surface of coatings became so rough that the contact angle was smaller.The study also found different composite resin had the specific solidification system, and the resin could fully solidify at room temperature and the cure rate was faster. This article also discussed various methods to calculate surface energy by using contact angle, and identified the most suitable method for calculating surface energy.

Related Dissertations

  1. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  2. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  3. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  4. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  5. Prototype Development of Intimate Apparel Mannequin,TS941.2
  6. Synthesis and Properties of the new anti-clotting material in modified ammonium phosphate zwitterion,R318.08
  7. Preparation and Application of Water-based Polyurethane to Improve Wet Rubbing Fastness,TS193.2
  8. Study on Organic Silicone Modified Epoxy Resins Performance and Preparation of Adhesive,TQ323.5
  9. Silica / poly (vinylidene fluoride) Hydrophobic Coating and drag reduction performance,TB383.1
  10. Preparation of a Water Vapor Permeability Controllable Shape Memory Polymer and Its Application on Fabrics,TS195.2
  11. Study on Synthesis and Anticorrosion Properties of UV-cured Metal Coating,TQ637
  12. Preparation and Properties of UV-Curing Functional Materials,TB34
  13. Preparation and Study of Polyacrylamide-based Antifouling Materials,TQ637
  14. A New Technology for Removing Trace Water from Polyether Component and Its Application in RIM-PUE,TQ334.1
  15. The Research of Environment Simulation Vacuum Vessel for Electric Products on Some Issues,TM07
  16. Study on Carboxyl Side Groups Containing Poly Aromatic Ether Sulfone Ketone and Modification of Epoxy,O631.3
  17. Research on Preparation and Properties of MDI Based Polyurethane Material,TQ323.8
  18. Synthesis and Propertise of a Novel of Side Chain Fluorinated Polyurethane,TQ323.8
  19. Nanomaterials modified polyurethane resin filled Research and Application,TB383.1
  20. Synergistic Effects of Intumescent Flame Retardant/Inorganic Nanoparticles,TB383.1
  21. Polyurethane solid - solid phase change materials Preparation and Characterization,TB34

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Specialty plastics > Elements of organic polymer plastic > Silicone plastic
© 2012 www.DissertationTopic.Net  Mobile