Dissertation > Excellent graduate degree dissertation topics show

The Dynamic Characteristic Analysis on the Strcutre of Flat-top Tower Crane

Author: QiShanPeng
Tutor: XiaYongFa
School: Northeastern University
Course: Mechanical Design and Theory
Keywords: flat-top tower crane finite element method dynamics sensitivity analysis dynamic optimization
CLC: TH213.3
Type: Master's thesis
Year: 2009
Downloads: 144
Quote: 0
Read: Download Dissertation

Abstract


The flat-top tower crane has abroad application in city construction and industry lifting these years. The design of flat-top tower crane, mostly based on traditional analogy and static performance in current, induces some shortages, for example, high weight and bad dynamic characteristic. The bad performance will affect both efficiency of flat-top tower crane and physical health of manipulator. Research show that dynamic rigidity of flat-top tower crane is the most important parameter, which affects dynamic characteristic of flat-top tower crane structure significantly, Usually, it is described in terms of the structure’s natural frequency.The mechanic properties of mechanical systems include two aspects of static and dynamic characteristics. The paper aims to process optimum design of flat-top tower crane structure based on dynamic characteristic, and finite element analysis software ANSYS is utilized to establish the parametic modal of flat-top tower crane. This paper presents the static analysis and dynamic analysis. Through the modal analysis on the structure of flat-top tower crane, the first twelfth natural frequency and vibration mode are calculated when the trolley with full load. The fact affecting the dynamic characteristics of the flat-top tower crane belongs to low-frequency vibration.Through the harmonic response analysis, the ranks of natural frequency are gained, and the second-class natural frequency is found as the main factor influnencing the dynamic characteristics.The optimum design of flat-top tower crane based on dynamic characteristic is accomplished by ANSYS, considering the dynamic stiffness of system structure as dynamic optimization objective. Before the optimum, sensitivity analysis has been done to determine the dynamic optimum design variables. After the optimization analysis all of analysis results were analyzed.

Related Dissertations

  1. Study on Characteristics of Contiuous Fiber-Reinforced Metal Matrix Composites under Hypervelocity Projectile Impact,TB332
  2. The Effect of Composite Additive on the SNCR,X701
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  5. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  6. Reaserch on Dynamics for Fast Walking of Biped Robot,TP242.6
  7. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  8. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  9. The Drying of Tilapia Fillet Using Supercritical Carbon Dioxide,TS254.4
  10. Influence of Nanostructure on Hydrophobic Properties at TiO2 Surface Studied by Molecular Dynamics Simulation,O614.411
  11. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  12. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  13. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  14. Non- rigid body system kinematics and dynamics of the collision point,O313.3
  15. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  16. On Repetitive Control Strategies for SPWM Inverters,TM464
  17. System Dynamics Research on Urban Public Safety,X913
  18. Study on Qualitiative Simulation for Safety Behaviours of Coal Mile Workers,X936
  19. Dynamics Analysis and Optimization Design of Hydraulic Excavator Working Equipment,TU621
  20. The Finite Element Analysis and Simulation of Excavator Working Device,TU621
  21. Behavior of Installation and Seepage Law of Offshore Skirted Suction Foundation for Offshore Wind Turbines,P75

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Lifting machinery > Mobile crane > Tower
© 2012 www.DissertationTopic.Net  Mobile