Dissertation > Excellent graduate degree dissertation topics show

Design of CMOS Temperature Sensor for RFID Tag

Author: DuZuoJun
Tutor: LeiZuoMing
School: Huazhong University of Science and Technology
Course: Microelectronics and Solid State Electronics
Keywords: RFID tag chip Temperature sensor Constant current source Low power consumption
CLC: TP212.11
Type: Master's thesis
Year: 2009
Downloads: 118
Quote: 0
Read: Download Dissertation


RFID technology is the 21st century's most promising IT world, but the current RFID tags can only identify the target object, but can not obtain information about their environment . Sensors can detect the environment in which the target object information, therefore, the combination of RFID tags and sensors to fully extend RFID system functions. The main research topic is the RFID tag chip -chip temperature sensor research and design , is based on the 13.56 MHz passive RFID tag chip based on years of research conducted . Passive RFID tag chip -chip temperature sensor is designed primarily to consider power and precision of the two indicators . For these two indicators , the thesis of RFID tags integrated temperature sensor analyzes the structure , focusing on the temperature sensor module and its interfaces with other modules . The temperature sensor module design , the study focused on the temperature detection circuit with high sensitivity and high resolution design of single slope ADC . Papers on a variety of temperature detection circuit for a comparative analysis , the final selection of the use of the BJT ΔV BE detect temperature, the circuit has a voltage - temperature relationship and good linearity and power supply rejection ratio of significant advantages. Selected single slope ADC PTAT voltage of the output process , which includes a constant current source and a comparator two modules. Papers designed for the low power requirements of a work in the sub -threshold region of the constant current source circuit , it has excellent temperature stability and power supply rejection ; Meanwhile, for the precision requirements for the design of a high -gain comparator . Using SMIC 0.35μm 2P3M process cadence simulation platform based on circuit simulation results show that the sensitivity of the temperature detection circuit 4.13 mV / ℃, single slope ADC with a resolution of 1 mV. The temperature sensor module and RFID tag chip analog front-end module integrated with the simulation , the simulation results show that the temperature sensor accuracy can reach ± 1.2 ℃, meet the design requirements .

Related Dissertations

  1. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  2. Software Approach to Implement Power Optimization in Embedded Handheld Mobile Gis Device,TP311.52
  3. Research on Low Power Techniques of the Instruction Fetching Unit in Embedded Processors,TP332
  4. Research of FBAR Temperature Sensor,TP212.11
  5. Design and Implementation of AT89S52 temperature measurement and control system,TP273.5
  6. A High-Performance Audio ∑△ ADC in 65nm CMOS Process,TN792
  7. The Research and Design on Wireless HART Adapter,TN915.05
  8. Low-power、multi-host Interface、multi-layer Design of the LCD Controller,TN873.93
  9. The Low Power Research of Adaptive Receiver of OFDM Digital Base-band,TN851
  10. Study on Mobility Management for IPv6-based Wireless Sensor Networks,TP212.9
  11. Way-predict Based Low Power Cache Design,TP333
  12. Fiber Methane Gas Sensor System and the Light Source Driver,TP212.14
  13. Based on low-power embedded Linux system design and implementation of the program,TP368.1
  14. A Low Power Power Management System for Passive RFID Tag Chip,TN402
  15. Labview-based PCR chip temperature control system,TP274
  16. Heterogeneous data -oriented low-power sensor networks TDMA protocol design and implementation,TP212.9
  17. Near threshold low-power SRAM study design,TP333
  18. Locking rail temperature monitoring node sensing unit design and implementation,TP274
  19. RTL-level and high-performance microprocessor architecture level low power design key technology research,TP332
  20. Soc - based low - power wireless temperature and humidity acquisition system,TN47
  21. Research and Design of the Intelligent Dangerous Gas Detector System,TH83

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Physical sensors > Temperature sensor
© 2012 www.DissertationTopic.Net  Mobile