Dissertation > Excellent graduate degree dissertation topics show
Study on the Zinc-nickel Alloy Electroplating in an Alkaline Bath
Author: LuWenShan
Tutor: ZhangZhao
School: Zhejiang University
Course: Chemistry
Keywords: zinc-nickel alloy electroplating alkaline cyclic voltammetry chronoamperometry
CLC: TQ153.2
Type: Master's thesis
Year: 2012
Downloads: 149
Quote: 0
Read: Download Dissertation
Abstract
|
Zinc-nickel alloys are an important kind of protective coatings for steel. These alloys have a promising future since they demonstrate higher corrosion resistance and superior mechanical properties, as compared to other zinc alloy coatings. It is believed that the research of zinc-nickel alloys has a significant theoretical value.In this thesis, we prepared zinc-nickel alloy coatings from an alkaline electrolyte using direct current and studied the effects of principle technological parameters on the zinc-nickel films. Finally, we probe into the corresponding deposition mechanism in process of the electroplating.The mean contents are as follows:(1) The influences of principal technological parameters (nickel concentration, current density,temperature and the brightener concentration) on the zinc-nickel alloy coatings were studied using energy dispersive spectrometer (EDS) and scanning electron microscopy (SEM), then we improved a set of operating conditions and conformed that the co-deposition of zinc and nickel behaved anomalously.(2) The microstructure of the optimized deposition was characterized by atomic force microscope (AFM), it could clearly seen that the film is compact and fine-grained. X-ray diffraction (XRD) measurements revealed that the alloy consisted mainly of the y-phase (NiZn3).The tafel polarization curves were measured to study the corrosion resistance of the film, the result showed the coating was an excellent anodic protective film exhibiting higher corrosion resistance than zinc.(3) The kinetics and mechanism for electrocrystallization of zinc-nickel alloys formed on steel substrate was studied using Cyclic Voltammetry (CV), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The results showed that the coelectrodeposition of zinc and nickel occurred under mass transfer control, and the microstructure of the original state fitted the characteristic of 2D nucleation/growth mechanism, it is also found that at more positive potential there was an enrichment of nickel in the coatings. Finally, The kinetics and mechanism were further investigated with chronoamperometry (CHR) and electrochemical impedance spectroscopy (EIS) techniques. We got the model of the current density transients during the nucleation/growth of zinc-nickel alloys. We also found that with negative bias increasing, charge transfer resistance reduced, and the electrocrystallization gradually changed from heteroepitaxial growth to isoepitaxial growth.
|
Related Dissertations
- Applied research in the sugar cane juice clarification process of alkaline pectinase,TS244.2
- Electrochemical Studies on Interaction between ApoCopC、BSA and Cu(Ⅱ)、Cu(Ⅰ)、Cd(Ⅱ)、Ag(Ⅰ),O646
- The Fabrication and Application of the Preanodized Inlaying Ultrathin Carbon Paste Film Electrode,O657.1
- Flow injection spectrophotometric determination of organophosphorus pesticides in environmental water research,O657.32
- Nano Pt / SiC Preparation, Characterization and Electrochemical Catalytic Performance,TM911.4
- (Class ) perovskite -type oxides catalytic elimination of N 2 O,X701
- The Study on the Separation Technology of Major Compoments of Rice Straw,TS721.3
- Clinical Significance of Urinary NTX for Metastatic Tumors of Bone,R738.1
- Effects of Temperature, Salt Stress, Alkaline Stress and Their Interactions on Seed Germination of Leymus Chinensis in the Songnen Grassland,S543.9
- Hydrthermal Synthesis Alkaline Fluroides Nanomaterlas and Host for Lanthaide Near-Infrared Luminecent Properties,TB383.1
- Temperature alkaline secondary smelting of aluminum ash,TF821
- The Three Metallic Materials porcelain crown turn of the gingival sulcus fluid alkaline phosphatase and aspartate aminotransferase levels,R783
- Study on Preparation and Properties of Electrodeposited Ni-W-P Alloy Film in the Stabilized Magnetic Field,TG174.4
- Synthesis of Hierarchical ZSM-5 and Its Application in Benzene Alkylation with Methanol,O621.25
- Preparation of Al2O3 Coating on Steel Substrate,TG174.4
- Step Sn-Ag alloy plating bump Preparation and process optimization,TN405
- Research of Treatment Technology of Plating Wastewater by Heavy Metal Chelator and Its Engineering Practice,X781.1
- Low concentrations of cyanide electroplating wastewater treatment research and engineering examples Fenton,X703.1
- Electroplating rinse water film France Reuse Project Application Study,X781.1
- The Study of Multi-step Electon Transfer at Liquid/Liquid Interface by Thin-Layer Cyclic Voltammetry,Q73
- Materials Studio can calculate the metal surface and in electroplating applications,TP319
CLC: > Industrial Technology > Chemical Industry > Electrochemical industries > Electroplating industry > Alloy plating
© 2012 www.DissertationTopic.Net Mobile
|