Dissertation > Excellent graduate degree dissertation topics show

Preparing EDC from Direct Chloration of Dry Gas

Author: WuXieShun
Tutor: YuanXiangQian
School: East China University of Science and Technology
Course: Chemical Engineering
Keywords: Mass transfer Pipe reactor Process optimization Pilot testing
CLC: TQ222.23
Type: Master's thesis
Year: 2012
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Dichloroethane (EDC) is the basic material for preparing polrvinyl chloride (PVC). Direct chloration and oxychlorination are the traditional two methods to produce EDC from oil route. But pure ethylene is required in both of the methods. We can reduce dependence on ethylene using dry gas as substitute. At the same time, the prospection will be exciting because of the significant economic value.Develop a new process for preparing EDC from direct chloration of dry gas. The influences on this reaction by characteristics of mass transfer have been studied. Finally, optimal technology conditions are determined as follows:Reactor form is pipe reactor connecting bubble reactor in series, reaction temperature is 84℃, ratio of ethylene and chlorine is 1:1.2, catalyst consumption is 0.4% of the total EDC, residence time is 14 seconds. On this condition, selectivity of ethylene is 99.5%, conversion of ethylene is more than 98%, and the concentration of EDC can reach to 98.5%.

Related Dissertations

  1. The Computer Simulation of Roller Drying for Flaky Agriculture Materials,S226.6
  2. Analysis of Nutritional Compositions and Quality of Shishen (Eremurus Chinensis Fedtsch.),S647
  3. 1 - deoxynojirimycin synthetic route design and process optimization,TQ463.5
  4. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  5. Tianjin COSCO Logistics ( Tian Rong ) business process optimization and Countermeasures,F552
  6. ABS Slurry Dehydration Process Optimization,TQ325.2
  7. Bottom blowing high pressure nitrogen Experimental Study of High Nitrogen Steel Metallurgy,TF763.1
  8. Study on Preparation of Diaminonaphthalene by Nitration and Reduction of Naphthalene,TQ241.52
  9. Synthesis and Properties of Novel Diphenyl-containing Epoxy Resin,TQ323.5
  10. The Development and Application of the Electricity Utilization MIS in the Oil Plant,TM769
  11. The Impact of Mass Transfer Effects on the TiO2 Photocatalytic Material in the Flow State of Water,X703
  12. Multi-Agent Differential Evolution Algorithm and Its Applications in Optimization of Fermentation,TP18
  13. Modeling and Optimization for Combustion Process in Firing Zone of Tunnel Kiln,TQ175.653.1
  14. Research on High Effective Utilizations of Water Evaporative Cooling Technology Based on Exergy Analysis of Virtual Cycles,TU831
  15. Research and Design on Vacuum Pressure Impregnation and Drying System,TB79
  16. Study on the Mass and Heat Transfer in Liquid Vacuum Evaporation Freezing Process,TK124
  17. Freeze-dried Microscopic Observation Device Development and the Research on Preparation of Nanopowder by Freeze-dried Method,TB383.1
  18. Study on the Refining Technique of Ladle Furnace in Tonghuasteel,TF769
  19. Study on the Technology of Microwave Vacuum Drying about Stropharia Rugoso-annulata,TS219
  20. Process Optimization Based on Different SO2 Emissions Management Systems,X701.3
  21. Hospital outpatient Process Optimization Case Study,R197.3

CLC: > Industrial Technology > Chemical Industry > Basic Organic Chemistry Industry > The production of aliphatic compounds ( acyclic compounds) > Halogenated derivatives of aliphatic hydrocarbons > Saturated lipid hydrocarbon halogenated derivatives > The halogenated derivatives of ethane
© 2012 www.DissertationTopic.Net  Mobile