Dissertation > Excellent graduate degree dissertation topics show

Structure and Performance of Fe-based Amorphous Coatings Prepared by HVAF and HVOF

Author: GuoRuiQiang
Tutor: LiuLin
School: Huazhong University of Science and Technology
Course: Materials Science
Keywords: HVAF HVOF Fe-based amorphous coating Polarization curve Electrochemical impedance spectroscopy Friction and wear resistance Bonding strength Thermal shock resistance
CLC: TG174.4
Type: Master's thesis
Year: 2011
Downloads: 131
Quote: 0
Read: Download Dissertation

Abstract


In this dissertation, the optimum processes used for fabricating Fe-based amorphous coatings by HVAF and HVOF have been determined. The structure, corrosion resistance, friction and wear behavior, bonding strength and thermal shock resistance of the two coatings were comparatively investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), oxygen determinator, thermomechanical analyzer (TMA), microhardness instrument, mechanical testing system, electrochemical workstation and friction and wear tester.Compact and dense Fe-based amorphous coatings with the same porosity and thickness were successfully prepared by HVAF and HVOF. XRD results show that they are partially amorphous, but the crystalline peaks in the coatings are notably weaker than those in the powders. Although HVAF and HVOF coatings have the same porosity, their micro-components and microstrucure are distinctly different, i.e., the oxygen content in HVAF coating is significantly lower than that in HVOF coating; quite a few dark contours exist at the interfaces between the partially melted particles in HVOF coating, which were only occasionally detected in HVAF coating; EDS indicates that the dark contours mainly contain Fe-oxides. Additionly, HVAF coating has a higher hardness than HVOF coating.Electrochemical polarization tests and electrochemical impedance spectroscopy (EIS) analysis indicate that the HVAF coating has better corrosion resistance than the HVOF coating, which can be attributed to the lower oxygen content in HVAF coating. These metal oxides are mainly located between the partially melted particles, which may hinder the formation of dense passive film on the one hand, and even become the diffusion channels for electrolyte to cause inner corrosion on the other hand. Electrochemical polarization tests indicate that HVAF coating has good corrosion resistance in simulated groundwater, which means that it can be used for protecting the spent nuclear fuel container.Dry sliding wear tests show that the HVAF coating has a lower lower friction coefficient than HVOF coating because the former can easily flake and cause fatigue wear due to its higher hardness and weak ability to resistant crack propagation while the latter has a higher oxygen content which can decrease the friction coefficient. Nevertheless, the wear weight loss of the two coatings is similar and much lower than that of the substrate, indicative of a good protective ability. Consequently, HVAF and HVOF coatings can be used as nonskid and anti-friction coatings, respectively. With the increase of the load, the friction coefficient and wear weight loss of HVOF coating increased slightly but maintain a low level. Additionally, HVOF coating has a good anti-friction property against metal and ceramic.Tensile tests show that the bonding strength of HVAF coating is very high, and fracture morphology indicates that it is mechanical bond between the coating and substrate. Thermal shock resistance tests show that HVAF coating has good thermal shock resistance in seawater and air conditions, which can be attributed to the matched thermal expansion coefficient between HVAF coating and substrate.As a new coating with good properties and relatively low cost, HVAF Fe-based amorphous coating can be made for industrial applications, especially in the areas of marine and the storage of spent nuclear fuel.

Related Dissertations

  1. Study on Properties of Thermal Shock and Ablation Resistance for Gr/Al-Mg Composites,TB332
  2. Situ synthesis of mullite stone whisker toughening microwave metallurgical corundum - mullite Refractories,TQ175.6
  3. Electrochemical Studies on Interaction between ApoCopC、BSA and Cu(Ⅱ)、Cu(Ⅰ)、Cd(Ⅱ)、Ag(Ⅰ),O646
  4. Plastic combined with relatively corundum - mullite composites impact,TQ175.1
  5. Investigation of Plasma Sprayed NiCr-Cr3C2 Coating on Mould CrZrCu Alloy Plates,TG174.442
  6. Preparation, Electrical Properties and Applications of La2(Mo1-xVx)2O9-α,TM911.4
  7. The Rheological and Adhesion Properties of EVA-based Hot Melt Adhesives,TQ436.4
  8. Investigation on Preperation, Characterization and Conductivity for Perovskite-type Proton Conductors,TM24
  9. Synthesis of Dopa Derivatives and Its Application in Adhesive Bonding,TQ430.7
  10. Study on High Wear-Resistant Alloy Steel Flux Cored Wires for Arc Spraying and Its Application,TG422.3
  11. Study of Microbial Corrosion in Central Air-conditioning Cooling Water System,TU831.4
  12. HVOF corrosion -resistant zinc coating materials research,TG174.44
  13. Pre-irradiation oxidized starch and starch carbamate ester Preparation and Properties,TS231
  14. Agricultural urea resin formaldehyde emission laws and regulation,TQ323
  15. An Investigation on the High PKA Activity and Heat Shock Resistance of Saccharomyces Cerevisiae,Q932
  16. The Detecting Equipment of the Laser Scratching and Testing Research,TN247
  17. Technological Selection of Erosion-Resistant Cr3C2-NiCr Coating and Study of Properties,TG174.4
  18. Numerical Simulation and Research on Gas-solid Two-phase Flow Behavior in High Velocity Oxygen Fuel Thermal Spray,TG174.44
  19. Study on the Technics Structure and Performance of Compound Processing of Gas Multi-Elements Peneterting and Electroless Plating,TG156.8
  20. Al_2O_3/Al wrapped powder and nano gradient coating of metal substrates,TG174.4
  21. The Synthesis of B4C Composite and the Research of Its Corrosion Behavior in Sea Water,TG174.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology
© 2012 www.DissertationTopic.Net  Mobile