Dissertation > Excellent graduate degree dissertation topics show

The Development of VCSEL Cap-sealing Machine and the Study of the Packaging Process

Author: ZhangJun
Tutor: WuFengShun
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: cap-sealing capacitor spot welder microcontroller optimal parameter
CLC: TG665
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


Vertical cavity surface emitting laser (VCSEL) because of its advantages of high density, high transfer rate parallel optical transmission, can be mass production, low cost, makes it widely used in optical interconnection, parallel optical information processing and wavelength division multiplexing (WDM) optical communications and other fields. Cap-sealing is very important to the production of VCSEL laser, which have a great impact on the air-tightness and mechanical properties of the products, hereby affecting the quality and reliability. Nowadays, the cap-sealing machine of our country is huge in shape and most of them have relatively backward control system. Therefore the development of a digital control, closure of small cap machine has great practical significance.The main work of this project is to develop a small cap-sealing machine which can meet the requirements of the TO(Transistor Outline) packages of 1mm-10mm vertical cavity surface emitting laser. This cap-sealing machine use 51 microcontroller as its central process unit and based on the principle of capacitor discharge welding, matched with the corresponding control circuit and mechanical parts, vacuum parts and nitrogen tanks to form a complete seal cap system. This machine can meet the needs of actual production, which can meet the requirements of smaller and digital.The design and research process of cap-sealing machine involves materials, machinery, electronics, controlling and process research. The design of cap-sealing machine include outline and structural design, hardware design, system software design and so on, which can further divided into many small modules include welding structural design, mechanical movement design, nitrogen gas tank shape design, circuit design, software design and air system design. Each module was very well designed and can work together. It has many advantages such as a full digital control system,simple operation and charge and discharge very stable. In addition, some tests of VCESL laser cap-sealing process were taken to get the optimal parameters of process parameters of cap-sealing machine. Qualitative analysis was used to identify the cap-sealing quality under different parameters. Optimal parameters were found out which is useful for the actual production staff.

Related Dissertations

  1. A Research and Development for Single Chip Micyoco AVR Usage,TP368.12
  2. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  3. Study of a New Power System Disturbance,R49
  4. The Kinematic Analysis of the Improved Delta Parallel Mechanism,TP242
  5. Thermal Power Plant Unit #1 Oilfield Boiler Blowdown Control System Design,TM621.2
  6. Research and Design of Controller for Off-grid Wind Power System,TM614
  7. Research on Control Method of Energy Storage Based on Stand-alone Pv Generation,TM615
  8. Research on An Intelligent Vehicle System with Automatic Road Identification and Control,TP242.6
  9. Study on Monitoring System of Continuous Casting Machine Based on Configuration Control Technology and VVVF Drive Control,TP277
  10. R&D for Pumping Frequency Energy-saving and Control Technology,TM921.51
  11. Car air-conditioning control system development,TM925.12
  12. Design and Implementation of High Efficiency Wind and Solar Hybrid Street Lamp Controller,TM571
  13. Design and Implementation of S08 Family MCUs General-purpose Writing System,TP368.1
  14. Intelligent reactive compensation Advancer Research and Design,TM761.12
  15. Synchronized multi-axis control system and network design,TP273
  16. A new type of micro- rotor aircraft flight control system design,V249.12
  17. Infrared technology in the intelligent application of methane sensors,TP212
  18. The Development of Bioreactor and Experimental Study on Performance,R318.6
  19. Research on Tangential Turbine Flowmeter Based on Eddy Current Detection Principle,TH814
  20. Research on Vehicle Fuel Consumption Measuring System Based on Radio Frequency Communication Technology,U467.4
  21. Research on Intelligent Management System of Vehicle Power,U463.6

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Light processing equipment and processing
© 2012 www.DissertationTopic.Net  Mobile