Dissertation > Excellent graduate degree dissertation topics show

Numerical Study on the Aerodynamics of the Subsonic Jet

Author: LiuYing
Tutor: WuKeQi
School: Huazhong University of Science and Technology
Course: Fluid Machinery and Engineering
Keywords: subsonic jet aeroacoustic jet noise
CLC: TB535
Type: Master's thesis
Year: 2011
Downloads: 88
Quote: 2
Read: Download Dissertation

Abstract


Study on the jet noise is always important due to its value on both the engineering and the research filed. After the reading of reference papers, a proper computing domain for the jet flow field and sound field simulation has been composed, and the numerical study has been carried out for both the flow field and the aeroacoustic field. The results are generally consisting with the statistic result of the jet flow.RANS study of the jet flow shows that that the region after the nozzle could be divided into three regions. The first region is the mixing region, where the potential core exists and last to about 7.7 times the diameter of the jet nozzle, in this core potential region, the velocity of the fluid is more or less unchanged. The following transition region is a transition between the mixing region and the full development region. In the full development region, the velocity at the axis reduces inversely portion to the distance from the tube nozzle. In the r-direction, the velocity has a so called“self-similarity”property, which shows that the velocity distribution on the r-direction has the same form on different cross section.Next the LES model and FW-H model is used to compute the transient flow field and aeroacoustic result of the free jet. Results show that the jet noise shows a great directionality on different direction, from 10°to 30°, the acoustic noise is much higher. This directionality is not only related to the property of the quadric pole but also the reflection of sound wave in the flied.Last, the draft about the jet noise setup is presented based on the numerical results we got.

Related Dissertations

  1. Design of Servo Control System with Linear Motor Based on Digital Filter Technology,TM359.4
  2. Research of Adaptive Active Noise Control Based on Neural Network,TP183
  3. A Research on the Methods for Designing and Calculating Performances of Engine Cooling Fans,TK403
  4. Design and Optimation for Cross Flow Fan in Air-conditioning,TH43
  5. Roots blower performance optimization and numerical study of flow field,TH444
  6. Digital Technology in Architectural Design Research,TU201.4
  7. High-frequency soft magnetic thin films and its electromagnetic noise suppression performance applied research,TB43
  8. Theoretical and Experimental Research on 1.06μm Yb3+-doped Phosphate Fiber Laser,TN248
  9. Applied GPS/BD2 quadrature receiver VCO design,TN752
  10. Miniaturized image intensifier system and its cooling performance of,TN144
  11. Diffusion of Active Brownian Particles Far from Equilibrium,O414.22
  12. The Design and Application of Wind Turbine Airfoil Considering the Aerodyamic Noise,TK83
  13. Research on the Test of Weak Equivalence Principle with a High-Q Torsion Balance,O412
  14. Empirical Research on the Impact of Issue Price Inquiry and Noise Trading to the Abnormal Return of China’s Initial Public Offering,F832.51
  15. Acoustic Environment Prediction and Impact on Human Annoyance of Street Building,TU112
  16. Research and Analyze of Diesel Engine Noise Quality for Motor Vehicle,U464.172
  17. Destriping of TDI-CCD Remote Sensing Image,TP391.41
  18. Design of Low Noise Modulator with Lo Divider,TN761
  19. The Study of Low-noise Low-light-level Image Acquisition System,TP274.2
  20. Digitally Trimmable Analog Front-End Chip Design for EEG Signal Acquisition,TN402
  21. Low Frequency Noise of NC-SI: H/C-SI Heterojunction Diode,TN315.2

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Vibration, noise and its control > Vibration and noise control and its use
© 2012 www.DissertationTopic.Net  Mobile