Dissertation > Excellent graduate degree dissertation topics show

Preparation and Electrochemical Performance of LiFePO4/CA Material with 3D Conductive Network Structure

Author: JiangQiong
Tutor: XuYunLong
School: East China University of Science and Technology
Course: Materials Science and Engineering
Keywords: LiFePO4/CA nanocomposite 3D conductive network structure Impregnation Nanocomposite High rate performance
CLC: TM912
Type: Master's thesis
Year: 2012
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


LiFeP04 cathode materials have the advantages of high working voltage, huge specific capacity, safe, low leakage current, short charge-discharge time and wide working temperature, which is the best choice for driving power source of vehicles. But the low electrical conduction rate and low Li ion dispersing rate limit the discharging characteristics under high multiplying power.In this paper, we used the Fe(NO3)3·9H2O and LiH2PO4 as the reaction material, the 3D-network CA and KB as both hard temples and conductive framework, applying the wet impregnating method, produced a conductional 3D-network LiFePO4/C nanomaterial, and using XRD, SEM, TEM, BJH, Raman, TGA and electrical chemical test to study the structure, electrochemical characteristics and mechanic of this material.The results show that LiFePO4/CA material preserves 3D-network structure as CA, and the LiFePO4 dispersed on the inner wall of CA; LiFePO4/CA material shows the both phenomenon of oxidation-reduction Li storage between FePO4 and LiFePO4 and the interface Li storage; In this LiFePO4/CA material, the LiFePO4 shows the discharge capacity of 157.4, 147.2,139.7,116.3 and 91.8 mAh g-1 under 1C,5C, 10C,20C and 40C. And the specific capacity loss is under 1% after 100 cycles under 1C.We studied the LiFePO4/KB nano material structure and electrochemical characteristics under different carbon ratio. The result shows when the carbon ratio increases, the 3D-network density will decrease, the oxidation-reduction Li storage between FePO4 and LiFePO4 will decrease and the interface Li storage will increase; We found a best carbon ratio of 28% behaves the best electrochemical characteristics, and the discharge capacity is 179, 162,146 and 127mAh/g under 0.2C,1C,5C and IOC.We used the thermal carbon reduction method to synthesis C-LiFePO4/KB nano material, The result shows:the LiFePO4 crystal size will not be affected by different lemon acid dosage; We found a best dosage of n(lemon acid):n(LFP)=1:2 which shows the best electrochemical characteristics. The specific capacity is 161,146,135 and 125mAh/g under 0.1C,1C,5C and 10C. The C-LiFePO4/KB material electrochemical characteristics are almost the same between the sintering atmosphere of pure N2 or N2:H2=9:1 gaseous mixture.

Related Dissertations

  1. Competitive Adsorption of Phenolic/Ethanol onto Silica Fiber Effected by Ultrasound in RTM Process,TB332
  2. Boron nitride fiber reinforced ceramic matrix composites through the waves and Properties,TB332
  3. Study of Immunosensors Based on Various Nanocomposites and Nanopaticles for the Detection of Prostate Specific Antigen,R446.6
  4. Containing iron TiO 2 Nanotube Adsorption removal of As (Ⅴ) study,X703
  5. Pollen template based indium oxide gas sensing materials research,TB381
  6. The Study on Modification of Montmorillonite and Preparation, Application of Recycled PVC-montmorillonite Nanocompsite,TB383.1
  7. Synthesis and Characterization of Nanoxides and Nanocomposite Materials Containing Manganese,O614.71
  8. The Synthesis and Characterization of Clay/Polyacrylamide Nanocomposite Hydrogel with High Performance,TQ427.26
  9. The Fabrication and Characaterization of Polymer-ZnO Composite Nanofibers,TB383.1
  10. Several electrochemical sensor hemoglobin Construction and applied research,TP212.2
  11. Study on the Steel Slag Base and the Performance of Steel Slag-asphalt Mixtures in Highway,U414
  12. NSTX device OH coil electromagnetic problem analysis and engineering design,TL622
  13. The Preparation of the Hydrogen Carrier Methylcyclohexane’s Dehydrogenation Catalyst Ni-Cu/γ-Al2O3 and Its Reaction Performance,TQ203.2
  14. Pulse Nanocomposite Coatings Preparation and Properties,TQ153
  15. Phosphate modification of nano- TiO 2 Photoelectrochemical Properties of the,TB383.1
  16. Synthesis and Properties of Double Network Nanocomposite Hydrogel,O648.17
  17. Preparation and Characterization of Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cell,TM911.4
  18. Automotive emissions of pollutants and the effect of the catalyst impregnation process,O643.36
  19. Study on Factors Affecting on Conductive Capability and Preparation Technology of Nano-Anticorrosion Conductive Paint,TB383.1
  20. The Preparation and Nonlinear Optical Effect Investigation of CdS/PVP, PbS/PVP Nanocomposite,TB383.1
  21. Preparation, Structure and Properties of Clay/Polymer Nanocomposite Hydrogels Based on N-isopropylacrylamide,TB383.1

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Battery
© 2012 www.DissertationTopic.Net  Mobile