Dissertation > Excellent graduate degree dissertation topics show

Modeling and PID Control of Air Ball System

Author: WangXunBao
Tutor: ShiHongRui
School: Donghua University
Course: Detection Technology and Automation
Keywords: Air ball system Mechanism modeling Fuzzy PID control
CLC: TP273
Type: Master's thesis
Year: 2012
Downloads: 39
Quote: 0
Read: Download Dissertation


Air ball system shares the characteristic of nonlinearity and multi-disturbance. The paper focuses on the study of air ball control system modeling and PID control algorithm, to meet the rapid and precise requirements.Due to the complexity of the system, the system was divided into two modules for modeling. Mechanism modeling and Least Squares (LS) identification methods were used to establish the model of the air ball. Using Matlab Simulink simulate the model, According to the different input data for system identification. The identification results show the complexity of the system mechanism。Modeling the control system of air ball and using the block of NCD in MATLAB to optimize the parameters of PID. The conventional PID controller and fuzzy PID controller were designed. The simulation results show that algorithm of PID is relatively simple, but regulation Take up a long time, Although Fuzzy control algorithm uses more system resources, But overshooting and adjust time performance better and achieve better control effect.Through experimental we observe actual control of the hardware device, Results show that Fuzzy PID control has small overshoot, high control precision, Control results better than the regular cascade PID control, Track resistance, immunity and robustness are also very good.

Related Dissertations

  1. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  2. Study on Applications of Soft Sensor in Chloromethane Recovery,TQ222.214
  3. Designed and Advanced Control Strategy Implement of DCS Base on PCS7 PVA Production Process,TP273
  4. Research of Micro-feed Control Strategy Based on Micro-EDM,TG661
  5. Modeling and Performance Assessment for the Grouping of the Thrust System of the Shield Machine,U455.43
  6. The Formation Mechanism of Debris Flow on Slope in Three Gorges Reservoir Area,P642.23
  7. MPCE experimental device three level system modeling and control algorithms,TP273
  8. The Virtual Instruments in the Application Process Automation Engineer Training,TP273
  9. An Experimental Study on the Construction of the Psychological Mechanism Model of "Choking" in Undergraduate Basketball Athletes,G841
  10. MPCE experimental apparatus and tube heat exchanger systems modeling and control algorithms,TP273
  11. Research on Control Strategy of Unified Power Quality Conditioner,TM761
  12. Aspect-Oriented Architecture Modeling,TP311.52
  13. The Research of 5KW Pemfc Control and Inverter Technology,TM911.4
  14. Study on Control System of the 600kN/1500kN·m Forging Manipulator,TG315
  15. Design and Research of Control System for Continuous Annealing Furnace,TP273
  16. Application of PID Control in Networked Control System,TP273
  17. Impedance source inverter in micro-electric vehicles on the Application of,TM464
  18. Hydraulic valve test bench oil sources Flow Control System,TP273
  19. Active heave compensation control system design key technology research,TP273
  20. Design of Control System for a Wall-Climbing Robot for Spying,TP242.3
  21. F2812 DSP -based support system maglev combination of digital controller,TH133.3

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile