Dissertation > Excellent graduate degree dissertation topics show

Research of Spectral Beam Combining Technology for High Power Fiber Lasers

Author: ZhangJianRong
Tutor: LiuHaiRong
School: Huazhong University of Science and Technology
Course: Optical Engineering
Keywords: Fiber laser Spectral beam combining Arrayed fiber grating Gaussian approximation Master-oscillator power amplifier
CLC: TN248
Type: Master's thesis
Year: 2011
Downloads: 73
Quote: 0
Read: Download Dissertation

Abstract


Fiber lasers have the advantages of high stability, high reliability, low cost, low jitter noise, high energy conversion efficiency, low threshold, diverse output wavelength, easy to adjust, implement and small volume. Single fiber laser can reach kilowatt level output. Higher power output is limited by nonlinear effect inside the fiber, heat deposition and pump power.Spectral beam combining technology combines a number of lasers without phase control, amplitude control, and polarization control while maintaining good beam quality, Thus this technology is widely adopted to reach high power in laser weapons and material manufactures.We have proposed a novel spectral beam combining method based on arrayed fiber grating in this thesis. In our design, planar waveguide is substituted by single mode fibers due to their higher thermo stability and better mode confining ability. There are none volume optical elements involved, which makes the system easy to adjust, moderate stability and much more scalability than traditional spectral beam combining technology. By using single mode fiber to guide the optic wave, our system can provide single mode output.By Gaussian approximation and effective index method, we have analyzed the performance of our proposed spectral beam combining system. We choose line-width fiber lasers and MOPA lasers separately as input channels, The simulation results indicate that our proposed beam combining system provides both good beam quality and high diffraction efficiency.

Related Dissertations

  1. The Optimization of Design for BICM System Based on Irregular LDPC Codes,TN911.2
  2. Thulium-doped Fiber Laser Technology,TN248
  3. Study on the Laser Characteristic of Tm3+-doped Double-cladding Fiber,TN248
  4. Research on Decoding Algorithms and Theoretical Analysis of LDPC Codes,TN911.2
  5. Study on Bit-interleaved Turbo Coded Modulation Technology,TN911.2
  6. Study on Double Space-time Transmit Diversity Technique,TN919.3
  7. Research LDPC code and its application in the compressed image transmission,TN919.8
  8. Research on Thulium-doped Fiber Lasers,TN248
  9. Low Density Parity Check Code Design for Half-Duplex Cooperative Relay Channel,TN911.22
  10. Optimal Design and Performance Analysis of Fountain Codes,TN911.22
  11. The Study of Spectral Beam Combining by Volume Bragg Grating,TN253
  12. Composite Cavity Fiber Laser and Its Sensing Applications,TP212.14
  13. Theoretical Analysis and Application of Special Fiber Bragg Gratings,TN253
  14. Theoretical and Experimental Research on 1.06μm Yb3+-doped Phosphate Fiber Laser,TN248
  15. Process Research on Fiber Laser-MIG Hybrid Welding Medium Thickness Aluminum,TG456.7
  16. Research on Widely Tunable Narrow Linewidth Fiber Laser,TN248.1
  17. On the Iterative Detection Algorithm for Turbo-BLAST,TN911.22
  18. TCM techniques of the LDPC code,TN911.22
  19. Research of U-wave Band Raman Fiber Laser,TN248
  20. Neodymium-doped fiber laser green,TN248
  21. Erbium-Doped Fiber Laser for Applications of Acetylene Gas Detection,TP274.5

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser
© 2012 www.DissertationTopic.Net  Mobile