Dissertation > Excellent graduate degree dissertation topics show

The Synthesis and Anti-foam Application for Modified Siloxane

Author: ZuoKai
Tutor: LvYa
School: East China University of Science and Technology
Course: Oil and Gas Storage and Transportation Engineering
Keywords: defoamer polyester modified silicone oil petroleum oil
CLC: TE624.8
Type: Master's thesis
Year: 2012
Downloads: 94
Quote: 0
Read: Download Dissertation

Abstract


Due to the anti-foam requirements of coke drum in delayed coking unit, this paper studied a new method to synthesize modified silicone oil of polyether ester, and had further application research with this kind of anti-foam agent in petrochemical oil. And particularly in terms of catalyst and raw materials, the development of innovative method were prepared.Firstly, the best foaming performance of coking products oil was determined in low temperature, and under this condition the performance of anti-foam agents was measured and some agents were selected according to the results. Conditions of best bubbling:ventilation velocity is 8ml/s, the ratio of coking diesel and wax is 9:1, temperature for 40℃.From the anti-foam performance and structure of polyether and ester base modified silicone oil, it could be conclused that two types of agents all had certain anti-foam performance, however, these properties still could not meet the requirements. By experiment of exploring new catalysts, new method was developed to synthesize modified silicone oil of polyether ester, which had good anti-foam property in coking products oil and reduced the cost. The conditions of synthesizing ester:the retio of acid and glycol was 1:1, reactive time was 8h, catalyst 3% and temperature for 115～120℃. The conditions of modifying silicone oil: D4:ester was 1:1.5, time and catalyst for auto polymerization of D4 were 2h and 0.06%, and active temperature for 140～145℃.

Related Dissertations

  1. Study on Properties of the Modified Polyester Fibers and Knitted Fabrics,TS182.5
  2. Analysis on the Influence of Ultrafine Grinded IFR on Anti-dripping Property of Polyester Fibers,TS195.592
  3. Electroless Silver Plating on the Polyester Fibers and Polyamide Fibers Modified by 3-Mercartopropyltriethoxysilane,TQ342.2
  4. Hydrophobic Modification of Ammonium Polyphosphate and Its Application on Flame-Retardancy of Polyester Decorative Fabric of Bullet Train,TQ314.248
  5. A Study in Designing and Synthetizing a New Type of Unsaturated Polyester Resin Standing for High Temperature,TQ323.4
  6. Study on Dopo Derivatives Flame Retardant Unsaturated Polyester Resins,TQ323.42
  7. Study on High Solid Content Water-borne Polyurethane Adhesives for Shoes,TQ433.432
  8. Research on the Synthesis and Application of Polyester Dispersions for Two-component Water-borne Polyurethane Coatings,TQ630.4
  9. Synthesis and Application Research of Carboxyl-terminated Polyester and Semi-crystalline Polyester for Hybrid Powder Coatings,TQ630.4
  10. Study on Preparation and Properties of Unsaturated Polyester/waste Rubber Powder/tires Fiber Composites,TB332
  11. The Synthesis of A New Coupling Agent for Preparing Natural Fiber Composites,TB332
  12. An annual output of 80,000 tons of polyester fiber liquid coloring project feasibility study differentiated,F426.72
  13. Application of Hyperbranched Polyester in Targeted Drug Delivery Systems,R943
  14. Synthesis and Characterization of Side Chain Liquid Crystal Polyester,O753.1
  15. The Engineering Design of Capacity Expansion of 4.2kt/a PET Unit,TQ323.4
  16. Synthesis of Polyester Elastomer and Modification of Nature Rubber,TQ334
  17. Research on Synthesis and Application of Hydrogen-containing Polysiloxane,O634.41
  18. Study on Improving Surface Properties of Cotton and Polyester Fiber & Fabric via Corona Discharge,TS195.5
  19. Application of the PU in the Textile Transfer Printing,TS194.4
  20. Development and Research on Supercritical CO2 Dyeing Technology,TS193.638
  21. Electroless Silver Plating on the Polyester Fiber and Cotton Fiber Modified with 3-Mercartopropyltriethoxysilane,TS195.5

CLC: > Industrial Technology > Oil and gas industry > Oil, natural gas processing industry > Petroleum refining > The refining process > Additive
© 2012 www.DissertationTopic.Net  Mobile