Dissertation > Excellent graduate degree dissertation topics show

Modification of Polyurethane Acrylates Coating with Cycloaliphatic Epoxy Resins

Author: LiChao
Tutor: DongQingZhi
School: East China University of Science and Technology
Course: Materials Science and Engineering
Keywords: Cycloaliphatic epoxy resin Cycloaliphatic epoxy acrylate Cycloaliphatic polyurethane acrylate UV curable coating
CLC: TQ630.4
Type: Master's thesis
Year: 2012
Downloads: 216
Quote: 0
Read: Download Dissertation

Abstract


Polyurethane acrylates (PUAs) and epoxides were important members of the matrix resin of ultraviolet (UV) curable coating. However, UV curable coatings made of traditional PUAs and epoxides used to have bad etiolation resistance and weather resistance, for the aromatic structures in the molecules of them. To overcome these drawbacks, we prepared UV curable coatings based on cycloaliphatic epoxy resins (EAs) and cycloaliphatic polyurethane acrylates (CPUAs) and studied properties of them. The research work was divided into three parts: The first part:UV curable cycloaliphatic epoxy acrylate resin (CEA) was synthesized by ring opening reaction of acrylic acid (AA) and cycloaliphatic epoxy resin. The product was characterized by FTIR and NMR. The influence of reaction conditions was discussed. The results showed that when the molar ratio of acrylic acid and epoxy group was 1.03:1, the conversion rate of the reaction reached 96.58% at 120℃for about 25.8h. Prepolymers of the UV curable coatings were prepared with reactive diluents and CEA, influence of the reactive diluents on viscosity of the prepolymers was studied. UV cured films of the prepolymers was analyzed by DSC, TG and pencil hardness tester. The results showed that the glass transition temperature (Tg) of CEA cured film was 64℃and the initial decomposition temperature was 314℃. With addition of the reactive diluents, heat resistance of the cured films was enhanced. The pencil hardness of the films could reach 6H.The second part:Cycloaliphatic polyurethane acrylates (CPUAs) was synthesized with polyester diol and polyether diol, cycloaliphatic diisocyanates and 2-Hydroxyethyl methacrylate (HEMA). The products were characterized by FTIR and DSC. UV curable prepolymers were prepared with CPUAs and reactive diluents. The cured films of the prepolymers were characterized by FTIR. Thermal and mechanical analyses were executed on the cured films. The results showed that the properties of the cured films were influenced by the kind of polyols and diisocyanates.The third part:Dual photosensitive matrix resins were prepared with cycloaliphatic epoxides and CPUAs. Radical type and radical/cation type UV curable coatings were prepared with the dual photosensitive matrix resins and reactive diluents. Influence of the structures and contents of the dual photosensitive matrix resins and kind of the reactive diluents on properties of the cured films was studied. The results showed that heat resistance of the cured film made of polyester polyurethane acrylates (CSPUAs) was better than that of polyether polyurethane acrylates (CRPUA). Hardness and heat resistance of the cured film made of tri-functional reactive diluent were better than that of bis-functional reactive diluent. The temperature change resistance of all the cured films was good. Finally, the coating formulation was chosed with optimal integrated properties.

Related Dissertations

  1. The Application of Nano-silica in Uv Curable-coating,TB383.1
  2. The Research on Synthesis and Technology of Cleaner Production of Photosensitive Arcylate in UV Curable Coating,TQ630.6
  3. Synthesis and Properties of Novel Silicon-and Phosphorus-Containing Cycloaliphatic Epoxy Resins,TQ323.5
  4. Anti-corrosion Property of Flake Zinc Epoxy Coating Doped with Rare Earth in SRB,TQ630.1
  5. Preparation and Study of Properties of Inorganic-organic Compound High Temperature Resistant Waterborne Anticorrosive Coating,TQ630.7
  6. Formulation Design and Performance Studies on Silicate Heat-insulating Coating,TQ630.7
  7. Synthesis of Fluorinated Copolymer and Its Application in Epoxy Coating,TQ630.4
  8. Study on Styrene-acrylic Latex Exterior Wall Coating Modified by Nano-ZnO,TQ630.6
  9. Study on Anti-corrosion Property of Modified Styrene-acrylic Latex Coating and Its Molecular Dynamics Simulation,TQ630.1
  10. Synthesis and Characterization of Modified Styrene-Acrylic Emulsion and Study of Coating,TQ630.6
  11. Synthesis of New Antifouling Agent and Its Application in Coating,TQ630.4
  12. Preparation of Polyacrylate/SiO2 Nanocomposite Emulsion and Investigation of Performance,TQ630.4
  13. Preparation of Non-APEO,s Formaldehyde-free Silicone-acrylate Copolymer Latex and Its Application in Pigment Printing,TQ630.4
  14. Preparation and Properties of Cathodic Electrophoretic Coating of Waterborne Polyurethane,TQ630.7
  15. Study on Synthesis and Properties of Uv-curable Epoxy / Polyurethane Powder Coating,TQ630.7
  16. Sulfamate based high solids polyurethane dispersion synthesis and properties of,TQ630.1
  17. Effects of Rheological Agents on Rheological Behaviors of Coating Colour with High Solid Contents and Surface Performance of Coated White Paper,TQ630.1
  18. Preparation and Characterization of Hydrophobic Gradient Coating Based on Polyacrylate Latex Containing Fluorine and Silicon in the Shell,TQ630.6
  19. Preparation and Characterization of Nano-TiO2 /acrylate Composite Emulsion,TQ630.7
  20. Research on the Synthesis and Application of Polyester Dispersions for Two-component Water-borne Polyurethane Coatings,TQ630.4
  21. Trimer Modified & High Solid Content Waterborne Polyurethane,TQ630.4
  22. Synthesis of Waterborne Polyurethane-acrylate Composite Emulsion for High-quality Wood Coating,TQ630.4

CLC: > Industrial Technology > Chemical Industry > Paint Industry > General issues > Raw materials and auxiliary materials
© 2012 www.DissertationTopic.Net  Mobile