Dissertation > Excellent graduate degree dissertation topics show

Design of Underground Mine Positioning System Based on IEEE 802.15.4/ZigBee

Author: YiLiQi
Tutor: LiWei
School: Beijing University of Posts and Telecommunications
Course: Electromagnetic Field and Microwave Technology
Keywords: ZigBee Underground Locate CC2430/CC2431 CAN bus
CLC: TP29-A1
Type: Master's thesis
Year: 2010
Downloads: 532
Quote: 3
Read: Download Dissertation


Currently , the countries of the importance of coal mine production safety has been upgraded to an unprecedented level , but the mine continues weak disaster relief after the disaster exposed the drawbacks of the current monitoring system : The monitoring system has difficulties in management of personnel into the wells , Inoue difficult to grasp the dynamic distribution of mine personnel and operating conditions . This article is from the network protocol stack and angle -depth study of the IEEE 802.15.4 protocol and ZigBee wireless communication technology, the ZigBee technology with several wireless transmission technology to compare summed up the advantages of ZigBee technology . Subsequent mainstream underground personnel positioning system (including the introduction of RFID the underground positioning system and the underground positioning system ) based on ZigBee technology and comparison , obtained ZigBee technology is applied to the underground personnel positioning system with low-cost , safe, reliable, low- power consumption and other advantages . On this basis , design the overall scheme of the the downhole based on IEEE802.15.4/ZigBee agreement Positioning System . The system uses a combination of ZigBee wireless network and CAN bus build data communication platform , the transmission of information to work underground personnel positioning data and gas concentration Inoue control center . This article describes the function and structure of the underground positioning system based on the IEEE 802.15.4/ZigBee protocol . Elaborate system hardware circuit design , including the gateway nodes based on CC2430/CC2431 nodes and CAN bus module ; systems equipment software design , and show a simple demonstration system to test the positioning effect . The ZigBee network development in this article is based on TI's ZigBee protocol stack, Z-Stack and IAR Embedded Workbench integrated development environment . Finally , the future direction of development of the subject , the application of ZigBee technology in other areas as well as subject the next step to do the work carried out by the outlook .

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. A Study on the Strategy of Accoustic Environment Design of Underground Space Station in the City of China,U231.4
  3. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  4. Study on the Locomotive Dynamic Supervision System,U284.48
  5. Wireless Sensor Net Based Study on Comprehensive Energy Monitoring Technology of Electric Vehicle,U469.72
  6. The Inductive Load Based Vehicle Body Network Control System,U463.6
  7. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  8. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  9. Research on High-Performance Computer I/O Bus,TP336
  10. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  11. Development of the Digitizer Based on PCI-E Bus,TP274.2
  12. Research of ZigBee Node Used in Smart Home,TN929.5
  13. Design of LXI 1553B Bus Communication Module,TP273
  14. Design of the Main Controller in Automotive Body Network Control System,TP273
  15. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  16. Based on ZigBee wireless sensor network research,TN929.5
  17. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  18. Study on Time Synchronization Method for Urban Lighting Management System,TM923
  19. Design on the Individual Cow’s Identification and Position System Based on ZigBee,TN929.5
  20. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  21. Location Assisted Wi-Fi Discovery on Mobile Devices for Energy Saving,TN929.53

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > The application of automation technology in all aspects of
© 2012 www.DissertationTopic.Net  Mobile