Dissertation > Excellent graduate degree dissertation topics show

Establishment of a Protocol of Pre-shipment Quality Control Process for Protect Gloves

Author: ZuoRui
Tutor: ShenWei
School: Donghua University
Course: Textile Engineering
Keywords: protective glove pre-shipment inspection sampling methods computer programming
CLC: TS941.79
Type: Master's thesis
Year: 2012
Downloads: 10
Quote: 0
Read: Download Dissertation

Abstract


Pre-shipment inspection is the last quality checking processus before merchandises are exported to the buyer’s country. After ordering a number of articles, the buyer lets a third party control the ordered goods before they are dispatched to him. Normally an independent inspection company is assigned with the task of the PSI, as it is in the interest of the buyer that somebody not connected with the deal in any way verifies the amount and quality. This way the buyer makes sure, he gets the goods he paid for. Normally, it is the supplyer who contact the third party for the details of the inspection. But as the foreign buyer are demanding more and more, many buyers from aborad start to creat their own inspction process as well as their own quality standards to make sure that the quality meets their requirements.By describing the procedures of PSI that I have designed during my internship in the Company of CMIG in France, including the packing inspection, trademarks and logos inspection, weight and dimensions checking, surface defects inspection, etc, othis paper shows the details of the PSI requirements demanded by French importers.To choose a right sampling method is also an important aspect for pre-shipment inspection. We use AQL inspection. This is an international method which can checking if a product, manufactured by mass manufaction, can meets a special quality requirement. This paper describes the way to compare different sampling methods and how to choose one method which is both easy and suitable for the special requirements of protective gloves.In the end, this paper describes how to realize this inspection procedure by a computer program, which greatly simplified the inspection practically. It also inspire people to solve practical problems by crossdisciplinary methods. The optimization and unifying of the pre-shipment inspection process has solved a practical problem for CMIG Company. This project will be carried out by the year of 2012. The paper is also valuable for Chinese protective glove exporters.

Related Dissertations

  1. Quercus leaf leaf standardized parametric studies and standard automatic fitting software system development,TP391.41
  2. The Study on the Surrogate Model of the Numerical Simulation Model of Groundwater,P641
  3. An Empirical Investigation on Shanghai Ordinary High School Students’ Understanding of Sampling,G633.6
  4. Research and Implementation of the digital topographic map quality inspection system,P217
  5. Computer-aided calculation of taurine production process design,TQ463
  6. The Understanding Level of Sampling Method in Ordinary Senior Middle School Students,G633.6
  7. Network Traffic Monitoring Model Based on the Sampling Algorithm and Automatic Clustering Algorithm,TP393.06
  8. CMM complex surface measurement - based sampling method and the probe radius compensation research,TH721
  9. Study on the Structural Optimization of Mesh Deployable Antennas,TN823.27
  10. Improvement of the New True Triaxial Apparatus and Mechanical Characteristic Analysis of Saturated Sand,TU411.3
  11. Development of Microcomputer Programming for Low Speed Wire Electrical Discharge Machining,TG484
  12. Study on the Decontamination Method of Penicillin Workshop,TQ465.1
  13. The Research and Simulation of the Medium Erection Device,TP391.9
  14. Occurrence of Lily Virus Disease and Detection Methods of Virus,S436.82
  15. Study on the Diversity of Insect Species in Hupingshan National Nature Reserve,Q968
  16. Study on Random Number Generator and Random Sampling in Monte Carlo Method,O242.2
  17. Double Value Characteristic of Leak Rate of Pressure Adding Helium Mass Spectrum Test and the Reliable Combination of Gross-and Fine-leak Detection of the Seal,TN602
  18. SP table method of computer programs on the quality of secondary school standardized tests,TP311.11
  19. Research on Sampling Method to Improve Accuracy of Strip Digital Terrain Model,U212
  20. Studies on New Methods for Constructing and Evaluating Core Collection of Plant Germplasm Resources,S32
  21. The Development of RYY-E Medical Instrument Control System,TP399

CLC: > Industrial Technology > Light industry,handicrafts > Garment industry,footwear industry > Garment industry > Clothing standards and testing
© 2012 www.DissertationTopic.Net  Mobile