Dissertation > Excellent graduate degree dissertation topics show

Comparative Study of ISO and AGMA Gear Strength Rating Methods for Involute Cylindrical Gears

Author: LvYunZuo
Tutor: WuChangLin
School: Huazhong University of Science and Technology
Course: Mechanical Design and Theory
Keywords: gear strength ISO standard AGMA standard comparative study orthogonal test
CLC: TH123.3
Type: Master's thesis
Year: 2011
Downloads: 98
Quote: 0
Read: Download Dissertation

Abstract


Gear strength rating standard is one of the criteria for measuring gear quality. Discrepancies exist in different calculation methods of international and advanced foreign standards for involute cylindrical gears. This thesis makes a comprehensive comparative study of International Standards Organization (ISO) standard and American Gear Manufacturers Association (AGMA) standard, which are widely applied in scientific research and engineering practice, in order to rationally evaluate different standards’calculation methods and results as well as efficiently apply standards to engineering practice.First an overview of current research on comparison between different gear strength rating standards was presented,and deficiencies of current research were pointed out; then discrepancies between ISO and AGMA standards were analyzed from theoretical aspect, comparison between ISO formulas and AGMA formulas was made, parameters and correction factors applied in the two standards were classified and compared by their meanings and influence factors they consider; finally 18 representative gear meshes chosen by means of orthogonal test were calculated, effects of variation gear design parameters on strength rating results of the two standards were analyzed by range analysis of orthogonal test, strength rating results of the two standards were compared, comparative study about the value of parameters and correction factors of the two standards and their effects on gear rating results was carried out, main cause of the discrepancies in gear rating results of the two standards was analyzed.The study indicates that neither of the two standards is more conservative than the other one, and the strength rating results of AGMA standard are more sensitive to the change of gear design parameters. The study also indicates that differences in parameters and correction factors applied in the two standards result in the discrepancies in gear rating results of the two standards; parameters and correction factors between the two standards are different because the two standards focus differently on theoretical derivation, experimental data and empirical formulas, which makes the two standards apply different strength theory and calculation methods in the calculation of some parameters and correction factors, moreover, gear experiments of the two standards were carried out under different experimental condition,which lead to the differences between experimental data of the two standards.

Related Dissertations

  1. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  2. Process Optimization and Degradation Kinetics for Microwave Vacuum Drying of Different Traditional Chinese Medicine Extract,TQ461
  3. Study on Extracting Process of Rhizoma Alismatis and Rhizoma Smilacis Glabrae and Their Hypouricemic Effects,R284
  4. Comparative Research on the Contents of Information Technology in Elementary Schools between China and India,G623.58
  5. The Research of Synthesis of Bisphenol-A Polycarbonate Through Melt Transesterification Process,TQ323.41
  6. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  7. The Comparative Study of the Course Content of Gymnastics of the Chinese Mainland and Taiwan Professional Sports Colleges,G831
  8. Eastern China in the New Comparative Study of differentiation of the peasantry,D663.2
  9. The Comparative Study about Financial Income and Expenditure Structure of China and England from 14 to 17 Century,K248
  10. The Comparison Research on Information Literacy Education in Primary and Middle School between China and America,G434
  11. Study on Comparison between Miccoli Thyroidectomy and Conventional Open Thyroidectomy,R653
  12. Optimization of the process parameters of the cigarette filter rod forming equipment opener,TS43
  13. China-United States Comparative Study of Special Education Teacher Certification System,G760
  14. Study on Organic Additives Applied to Electrodeposited Copper Foil,TF811
  15. Design and Simulation of Pressure Casting Process for Magnesium Steering Wheel,TG249.2
  16. Prevention of Pollution from Ships of Legal Issues,D922.294
  17. Comparative Study on Competitiveness of Regional High-tech Industry of China,F276.44
  18. Comparative study reported in the Japanese disaster,G212
  19. Comparative Study of the Environmental Moral Education Status between Urban and Rural Junior High School,G631
  20. The Comparative Study of Music Learning Psychology between the Senior and Junior Students,G633.951
  21. Junior Midel School Marthematics Curriculum Resources Exploitation Research,G633.6

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical design, calculation and mapping > Mechanical calculations > Strength calculation
© 2012 www.DissertationTopic.Net  Mobile