Dissertation > Excellent graduate degree dissertation topics show

Machine Isolation technical studies of the crystal oscillator

Author: QianZhiChao
Tutor: HuangXianHe
School: University of Electronic Science and Technology
Course: Detection Technology and Automation
Keywords: crystal oscillator vibration isolation phase noise random vibration
CLC: TN752
Type: Master's thesis
Year: 2010
Downloads: 40
Quote: 2
Read: Download Dissertation

Abstract


As the ultra stable standard frequency sources, crystal oscillators are widely used on different kinds of high-speed aircrafts. The electronic equipment on these high-speed aircrafts often has to work under a bad vibration environment. The crystal oscillator is very sensitive to vibrations. To provide the necessary spectral purity, a vibration isolation system for crystal oscillator is required to keep the accuracy and stability of electronic equipment.In this dissertation, the influence of vibrations on the crystal oscillators is analyzed based on the working principle of the crystal oscillators. The method of calculating SSB phase noise under different vibration environment is given. And to restrain the random vibration with frequency range 20Hz to 2000Hz effectively, several kinds of passive vibration isolation system models are analyzed, especially the displacement transmissibility of each model is calculated and simulated by Matlab. Furthermore, the standing wave effect of vibration isolators is also analyzed. Finally, a design of two-stage passive vibration isolation system for crystal oscillator is presented. This kind of vibration isolation system has low displacement transmissibility. The simulations and experiments are carried out.This dissertation introduced the instrument and procedure of experiment. Experimental results show that at the random vibration whose power spectral density is 0.05g2/Hz with frequency range 20Hz to 2000Hz, the dynamic SSB phase noise level of a 12.8MHz AT-cut crystal oscillator is reduced by this vibration isolation system effectively.

Related Dissertations

  1. Vibration Isolation Design of Powertrain Mounting System of a Commercial Vehicle,U463.33
  2. Charge-Pump PLL Z-domain Analysis and Low Noise Design,TN911.8
  3. Random Vibration Response Control and the Patran Redevelopment,O324
  4. The Research and Design of Radio Frequency Monolithic Voltage Controlled Oscillator in 0.18μm CMOS Technology,TN752
  5. The Design and Research of 4GHz DRO with Low Phase Noise,TN752
  6. X-band low phase noise PDRO Design and Implementation,TN752
  7. DBF microwave system design and implementation phase locked source,TN911.8
  8. Applied GPS/BD2 quadrature receiver VCO design,TN752
  9. Heavy-duty electric wheel dump truck engine mounting system for,U464.13
  10. Analysis of Parameter Calculation and Optimization in Vibration Isolation System Based on Genetic Algorithm,TB535.1
  11. Development of a C-Band Transceiver,TN859
  12. Research on Phase Noise Suppression in OFDM Systems,TN919.3
  13. With automatic calibration feature broadband VCO frequency oscillator (VCO) chip design,TN752
  14. The Design and Implement of Controlling Crystal Oscillator Based on TDC-GP1,TN752
  15. Research on Low Frequency Signal Detection Technique for Interferometric Fiber Optic Sensor,TP212
  16. Foundations of the building gravel cushion shock isolation performance analysis,TU352.12
  17. Stochastic Optimal Control of Nonlinear Suspension of Quarter Car Model,U463.33
  18. A Study of Direct RF Sampling Receiver in Magnetic Resonance Imaging System,R197.39
  19. Exact Fixed-Interfacial Substructure Synthesis Using Medium-Order Normal Modes,TB122
  20. Coded Modulation with Low Density Parity Check Code,TN911.2
  21. Fractional Frequency Synthesizer Design,TN74

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Basic electronic circuits > Oscillation technique,the oscillator > Oscillator
© 2012 www.DissertationTopic.Net  Mobile