Dissertation > Excellent graduate degree dissertation topics show

Liquefaction of Straws and a Preparative Technique of Foam Material

Author: WangYuHong
Tutor: SunFengWen
School: Nanjing Forestry University
Course: Wood Science and Technology
Keywords: wheat straw phenol PEG-400 liquefaction foam
CLC: TQ328.2
Type: Master's thesis
Year: 2010
Downloads: 150
Quote: 5
Read: Download Dissertation

Abstract


In order to release the current situation of environmental pollution caused by burning straw, and expand the application area of agriculture and forestry residues and enhance its using value, This thesis carry out the research of the wheat straw liquefaction in phenol and PEG-400(polyethylene glycol-400).1 The agriculture and forestry residues was liquefied after separation, probe into the mechanism of the main components of the liquefaction. The lignin will degrade when phenol reagent for the liquefaction reagent, ester bond and ether bond are broken and connected to a new group; and holocellulose is cross-linked to phenol after degradation , some intermediates with character of phenol have being found. The product which ethylene carbonate is liquefaction reagent is similar to PEG-400 as liquefaction reagent. The degradation of lignin occurs in the partial replacement of the benzene ring; holocellulose degraded to alcohols, carboxylic acid derivatives and compound of furan ring.2 Wheat straw liquefied with both phenol and PEG-400 as liquefaction reagents, which generate a new product of liquefaction. Discussed the effect of liquefaction factors on liquefaction efficiency. The better liquefaction condition of the wheat straw liquefaction in phenol and PEG-400 is: solid-liquid ratio : 1.2, phenol ratio : 50%, hydrochloric acid :25%, liquid temperature : 130℃, reaction time : 50min.3 we carry out the product of liquefaction cross-linked to formaldehyde. Discussed the effect of factors on performance of resin. getting the better resinification condition is : the molar ratio of sodium hydroxide :0.5,the molar ratio of formaldehyde: 1.2, the temperature : 90℃, time : 60min.4 we get the foam with the resin of wheat straw liquefaction as material. Probe into the effect of factors on performance of foam. The better foaming technology condition as follows: the dosage of foaming agent : 10%, the dosage of surfactant :10%, the dosage of calcium carbonate:10% , the dosage of firming agent: 17%, the dosage of isocyanate :20%.

Related Dissertations

  1. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  2. The Realization of Coal Liquefaction in the Continum Model System and the Experimental Research of Coal Liquefaction,TQ529.1
  3. Fly Ash study of low temperature ceramic foam,TU52
  4. Effects of Enzymes on Metabolism of Polycyclic Aromatic Hydrocarbons in Plant,X173
  5. The Preparation and Electrochemical Tests of Carbon Foam,O613.71
  6. Theeffect of Environmental Factor on Rooting Culture of Paeonia Suffruticosa in Vitro,S685.11
  7. Synthesis and Application of New Halogen-free Flame Retardant Cotton with Expandable Anti-wrinkle Agent PNX,TQ314.248
  8. Study on Oxidation Treatment of Phenol Contaminted Soil Using Potassium Ferrate,X53
  9. Effects of Soil C/N with Increasing Compost Wheat Straw on the Carbon and Nitrogen Metabolism and the Quality of Flue-cured Tobacco Leaves,S572
  10. Preparation of Electrode by Electrodeposition and Study on Performance of Degradation Phenol Wastewater,X703
  11. Research on Isolation and Polyphasic Taxonomy of a Phenol Tolerant Novel Species-Comamonas Zonglianii BF-3~T,X172
  12. Acrylic acid / acrylamide / montmorillonite superabsorbent terpolymer gel foam in mine fire in applied research,TD752
  13. Effects of Phenol on Digestive Function of Moina Macrocopa,X174
  14. Preparation of Phenol Molecularly Imprinted Polymers on the Surface of Silica and Its Application in DGT Technique,O621.2
  15. Studies on High Performance Water-based Acrylate Damping Coating,TQ633
  16. Effects on Physiological Metabolism and Fermentation of Saccharomyces Cerevisiae with Proteinase A Deletion,X792
  17. Pull off pieces of structural damage to buried nonlinear analysis numerical simulation,V222
  18. Research on Surface Quality Improvement of Microcellular Foam Injection Molding Parts,TQ320.662
  19. Extruded powder densification process of preparation of aluminum foam,TB383.4
  20. Phenol , aniline micelles on the adsorption process of flocculation,X703
  21. Refrigerator HFC-365mfc/HFC-245fa/CP triplex mixture foamed polyurethane rigid foam Preparation and Properties,TQ328.3

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Foam > Rigid foam
© 2012 www.DissertationTopic.Net  Mobile