Dissertation > Excellent graduate degree dissertation topics show

The Design and Application to Multi-axis Synchronization Control System Based on CPCI

Author: PengSheng
Tutor: SunZhiGang
School: Huazhong University of Science and Technology
Course: Pattern Recognition and Intelligent Systems
Keywords: CPCI Interface Rotary Screen Printing Machine Multi-axis Synchronous Control Parallel Bus
CLC: TP273
Type: Master's thesis
Year: 2011
Downloads: 36
Quote: 0
Read: Download Dissertation

Abstract


With the development of manufacturing industries, the requirements of machinery and equipment is increasing. The need for precision and control of real-time elevates. At the same time, new requirements of the stability become more important. Traditional rotary screen printing system uses single chip processor synchronization, processing speed and accuracy is limited. And the interface control card use traditional finger connector, anti-shock capability and electromagnetic compatibility can not meet the current harsh industrial environments.For these deficiencies, the thesis proposes the design scheme based on CPCI bus, which has the same electrical characteristics with the PCI bus and good portability. The thesis outlines the status and trends of PC bus, focusing on an overview of the CPCI bus in Industry. The thesis makes a brief description of multi-axis synchronous control technique, especially rotary screen printing machine synchronization principle. Based on the original structure and the synchronization control system, the thesis proposes scheme based on CPCI interface. At last control scheme is demonstrated.The thesis analyzes selection basis of the core device in control system, and briefly describes the TMS320F2407 chip and EPM3128 chip. The thesis focuses on functions and principles and hardware structure of the main control board and servo control board. Then analyzes advantages of CPCI interface to the system, and discusses the CPCI interface circuit implementation. In addition, from the aspect of software implementation, the thesis describes main functions and key technologies of the main control board and servo control board. At last, some features make simulation and verification.In the end, the thesis makes design to optimize the system and a summary of the contents of this article,mainly is machine vision applications in the system.

Related Dissertations

  1. Design and Reslization on the Certain Large-capacity Storage,TP333
  2. Studies on Synchronous Controller by Photoelectric Drop Ring in Rotary Screen Printing Machine,TS194.3
  3. The high - speed data acquisition system design and CPCI interface,TP274.2
  4. Control System and Networking of Rotary Screen Printing Based on Visual Servo Technology,TP273
  5. Image Processing System Design for Space Optical Communication Based on Dual DSP,TP391.41
  6. FLASH-based high-speed image acquisition and storage system,TP333
  7. Precision instrument highly reliable storage module design and implementation,TP333
  8. Synchronized multi-axis control system and network design,TP273
  9. Study of On-Line Intelligent Monitoring System about Register Precision of Printing and Dyeing,TP391.41
  10. Signal integrity analysis and design of high-speed parallel bus interface,TP336
  11. Research and Implementation on Parallel Storage Technique in Multi-bank Flash,TP333
  12. Investigation on an Interleaved Discontinuous-Current-Mode Single-Stage Power-Factor-Correction Converter,TM46
  13. The synchronous electronic transmission chain in rotary screen printing machine,TS194.332.2
  14. Real-time Synchronous System and Networking of Rotary Screen Printing,TS194
  15. The Research on Multi-axis Synchronous Control and Its Implementation Based on Parallel Bus,TP273
  16. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  17. Research on Design of an Angular Acceleration Control System,TP273
  18. Research on the Synchronous Control Algorithm of a Special Target Simulator,TP273
  19. Sliding Mode Variable Tructure Control for Separating-Mirror System and Inhibit Chattering,TP273
  20. Robust Model Predictive Control of Networked Systems,TP273
  21. Construction and Performance Analysis for In-Vehicle FlexRay Backbone Network,TP273
  22. Research of PROFIBUS-DP Typical Application System,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile