Dissertation > Excellent graduate degree dissertation topics show

Fiber Methane Gas Sensor System and the Light Source Driver

Author: WangTao
Tutor: LiuDeMing
School: Huazhong University of Science and Technology
Course: Optical Engineering
Keywords: Fiber methane gas sensor Comb-filter Differential detection SLED driver Constant-current source Temperature controller
CLC: TP212.14
Type: Master's thesis
Year: 2011
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


In recent years, the coal-mine accident happens so frequently, that it causes great repercussions in society. On the issue of coal-mine accident, the first casualty is the gas explosion, thus establishing the online and real-time gas monitoring system is very necessary. Fiber-optical sensor has the features of high sensitivity, rapid reaction, easy-to-network and so on. Besides, the security and non-pollution of the optical signal makes the fiber-optical sensor have a rapid development in detecting flammable and explosive gas. This thesis will introduce a system of fiber-optical methane sensor.This system is a methane concentration detection system that bases on the principle of gas spectral absorption. The light from the SLED passes a wide-band filter, and then it is filtered by two comb-filter, one is the detection light and the other is the reference light. The two light is detected by PIN, then the signals war processed by the MCU to collect the information of the methane concentration. The thesis analyzes the parameters of the parts, which compose the whole system.The stability of the SLED is very important to the system. In this thesis it also gives the design of the driver of the light source. The driver is composed by constant-current source and temperature controller. The constant-current source can export 0-1A current under the dictate of MCU, and the temperature controller can make the source work in the stable temperature. Also there are some protection circuits to promise the safety of the source, and the TEC is controlled by the PID circuit to promise the stability of the temperature.At the end of the thesis, gives some test data of the system and the processing method of the data.

Related Dissertations

  1. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  2. Link Enhancement Technology in High Frequency Sky-wave Communication,TN925
  3. Labview-based PCR chip temperature control system,TP274
  4. FPGA Implementation of Digital Down Conversion,TN791
  5. 4-Channel Charge Pump White LED Driver Design,TN312.8
  6. Research on Digital Automatic Gain Control and Sensitivity Time Control,TN957.5
  7. Nickel plated with nickel detection analyzer study,TQ153
  8. Design of Full Differential Detection ASIC for Full Symmetrical Micro Mechanical Gyroscope,TN966
  9. Research on Multi-rate Signal Processing Using FPGA,TN791
  10. Gyroscope in a fully differential amplifier research,TP211.2
  11. Study on Drive and Control Technology of High Power LED,TN312.8
  12. Serially concatenated key technologies of CPM,TN911.2
  13. Fiber Bragg Grating Temperature System of Power Cables Based on DSP Signal Demodulation Technology,TP212
  14. For medium voltage motor soft starter isolation switch power research,TM564.1
  15. One for downhole ultrasonic communication FSK modulation and demodulation techniques,TN914
  16. Design of Smart Temperature Controller Based on SOC,TP216
  17. Optical fiber methane gas concentration detection system design and implementation,TP212
  18. GT resonator with a tunable birefringent optical element binding comb filter,TN713
  19. Research on the High Birefringence Photonic Crystal Fiber Loop Mirror Comb Filter,TN713
  20. Research of Absorbed Fiber-optic CO Gas Sensor Signal Processing,TP212

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Physical sensors > Light sensor
© 2012 www.DissertationTopic.Net  Mobile