Dissertation > Excellent graduate degree dissertation topics show

Loss Characteristics of Infrared Hollow-core Bragg Fiber

Author: ChenChao
Tutor: ChenHeMing
School: Nanjing University of Posts and Telecommunications
Course: Optical Engineering
Keywords: Photonic Crystal Bragg fiber CO2 laser transmission Plane Wave Method(PWM) Finite Element Method(FEM) Defect Loss
CLC: TN253
Type: Master's thesis
Year: 2012
Downloads: 60
Quote: 2
Read: Download Dissertation

Abstract


With the development of optical fiber technology, the transmission wavebands gradually become farther and longer, shifting from near-infrared region below 2μm to mid-infrared even far-infrared. Unlike ordinary optical fiber for signal transmission, infrared Bragg fiber is always using transferring laser energy. Recent decades, we have launched a large number of theoretical studies in the field of infrared fiber, and gradually turned into the practical applications.At present, it has already been widely used transferring the CO2 laser energy in medicine and industry, and sensor applications.In this paper, by comparing the material’s optical and physical characteristics, and using the plane wave expansion method （PWM） to calculate the band gap, we select suitable materials （ As 2Se3/PEI ） and fill rate （ fμ0.8） in order to get a kinf of Bragg fiber for transmission 10 .6μm CO2 laser energy. On this basis, combined with the full vector finite element method （FEM） and using COMSOL software simulation to optimize structural parameters of the hollow-core Bragg fiber, and ultimately achieve low-loss transmission of 10.6 laser energy. The specific parameters are as follows, the periodic lattice is 7μm, high and low refractive index material thickness are respectively 1. 4μm and 5 .6μm,together 20 cycles, the radius of the hollow-core is 150μm .The loss value can be reduced to 5. 14dB/km at 10.6μm ,far better than the current 0. 01dB/m.Taking into account the imperfections of the production process, the paper also analyzes the impact of the single cycle defect. Simulation results show that, when the complete structure of the periodic lattice is 7μm in the second band gap , defect which size slightly larger than the periodic lattice can help to reduce the loss of Bragg fiber at 10 .6μm. On the contrary, the loss becomes greater. That is,when the defect 7. 18μm appearing in the first layer near the hollow-core,it is best for reducing the loss. The results have great significance to the production and applications of infrared fiber.

Related Dissertations

  1. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  2. Key Technologies of Dam-break Life Loss Risk Assessment Research,TV122.4
  3. Research of Irreversible Loss in Flow and Mexed Prosess,TK12
  4. Packet Loss Recovering Technology for Speech Transmission over Network,TN912.3
  5. Design and Processing of Hybrid Modulated HF Radar Waveform,TN958.93
  6. Multi-currency Notes Technology Research and Implementation,TP391.41
  7. Lijiang River,RS and GIS - based Soil Erosion Research,S157
  8. Research on the Laws of Nitrogen and Phosphorus Loss and Control Scheme in Eryuan Rural,X712
  9. Self-discovery , self-realization and self- Lost,I561.074
  10. Administrative Supervision System Defects and Countermeasures,D630
  11. Substrate microstrip bandpass filter parameters on the transmission characteristics of impact studies,TN713.5
  12. Research and Application on Ventilation Disasters’ Early-Warning and Pre-Control Technology in Coal Mine,TD76
  13. Evaluation of Bank Risk Management for Islamic Banks,F224
  14. A Comparative Study of the Belonging Theme in the Pigman and the Hairy Ape,I712.07
  15. Modeling and Stability Analysis of Networked Control System with Time-delay,TP273
  16. Research on Tax Loss from County Economic Perspective,F812.42
  17. On the defects and countermeasures of juvenile offenders in the probation system,D925.2
  18. Research on the Technology of Online Detecting for Weld Defects of Strip Steel,TG441.7
  19. Identification and Transfer of Drug Addicts’ Guardianship,D923
  20. On the perfection of the legal system of the state-owned assets transfer,F123.7
  21. Research of Cold-rolled Steel Sheet Surface Quality On-line Monitoring System,TG334.9

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Optical waveguide and integrated optics > Fiber optic components
© 2012 www.DissertationTopic.Net  Mobile