Dissertation > Excellent graduate degree dissertation topics show

Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control

Author: DuanXueChuang
Tutor: ZhouWuNeng
School: Donghua University
Course: Pattern Recognition and Intelligent Systems
Keywords: Drawing frame Autoleveller Self-Tuning Controller Fuzzy Control
CLC: TS103.3
Type: Master's thesis
Year: 2012
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


The degree of yarn unevenness is not only directly related to the yarn quality, but also indirectly affects the quality of manufactured goods. The yarn unevenness, especially for the long fragment, mainly is caused by the spinning process. Therefore, how to minimize the yarn unevenness has been an urgent research problem of textile industry.It is hardly to establish the precise and practically mathemalical model of autoleveller, because of the complicated of the traction mechanism, the changeful of work circumstance and the changeful system parameters of high-speed drawing frame. So it is more difficult to design autoleveller control system. Even if import autoleveller used in short segment still adopts open-loop control. From view of control theory, the autoleveller is an invariable value control system with the trait of strong noise and great time-delay. The most important reason of bad control effect of close-loop is lack of effective control algorithm.Based on the in-depth study of autoleveller system of high speed draw flame, this paper innovative bring forward new control algorithm of autoleveller system. It is different from open-loop control, close-loop control and mix-loop control introduced in anciently paper. The scheme of this paper is setting up united CARMA model including all measurability. And introduce the new algorithm Self-Tuning Controller and fuzzy-PID controller into the system and establish its close-loop control system. Then do some simulation used with MATLAB, and Test the effectiveness of the scheme algorithms combined DF-746 type of drawing frame.

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  4. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  5. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  6. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  7. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  8. Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
  9. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  10. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  11. Optimal Control of Emulsion System in Cold Rolling,TP273
  12. Research on Grinding and Classification Process Control of Sijiaying Concentrator,TP29-A1
  13. Research on pH Value of the Control Technology for Acid-contained Wastewater Integrated Treatment System in Ningxia Hengli,TP273
  14. Study on Industrial Boiler Water Level Control System,TP273
  15. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  16. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  17. Fuzzy Control System Design of Transformer Cooler,TP273.4
  18. The Research and Application of PID Parameters Self-tuning,TP273
  19. Study on Navigation and Obstacle Avoidance Technique for Auto Guided Vehicle (AGV),TP242
  20. Rolling heating furnace temperature control algorithm design,TP273

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Textile industry machinery and equipment > Weaving equipment
© 2012 www.DissertationTopic.Net  Mobile