Dissertation > Excellent graduate degree dissertation topics show

The Research on Characteristic of Electronic Controlled Splitter Based on Photonic Crystal

Author: YangJun
Tutor: ChenHeMing
School: Nanjing University of Posts and Telecommunications
Course: Optical Engineering
Keywords: Finite Difference Time Domain Method Plane Waves Method Photonic Crystal Defect mode Optical Switch Electronic control Splitter
CLC: TN814
Type: Master's thesis
Year: 2012
Downloads: 52
Quote: 0
Read: Download Dissertation

Abstract


As the 3G network is more and more widely used, the demand of high-speed accessnetwork is increasing rapidly. The most effective and direct method to increase the bandwidthof access network is fiber-optic access, what is FTTH. And the splitter is one of the extremelyimportant function devices in FTTH system. As a new type of material, due to its highefficient light guide function and lossless transmission, .photonic crystal is widely used tomake into devices such as beam splitter, WDM and demultiplexer and so on .In this thesis, the conduction mechanism of light wave in photonic crystal is introducedfirstly. Based on that theory, a new Y-type of 1×4 controlled photonic crystal splitter, which ismade up of three cascade 60°angle in two-dimensional photonic crystal, is proposed. Withthe help of the plane wave method and finite difference time domain method, the transmissioncharacteristics of optical signals in photonic crystal splitter is investigated when the radius ofdielectric cylinder at the branch is different.Therefore, photonic crystal beam splitter withimproved structures is designed and analyzed. Based on that, photonic crystal beam splitterwith uniformed and non-uniformed distributed are designed respectively. Secondly, theprinciple of photonic crystal optical switches is studied On the basis of that structure, fourswitches are generated through the introduction of point defects, and tunable photonic crystalresonator is generated when the point defects are filled with Phenylacetylene liquid crystalmaterial. By analyzing the impact of point defects on the beam splitter performance ,the bestpoint-defect parameters have been identified. According to the theory of defect modemigration, ten kinds of“on-and-off”control combinations of both uniformly distributed andnon-uniformly distributed photonic crystal beam splitter are achieved, such as 1111，0111，1011，0011，0101，0110，1001，0001，0010，0000。The results show that: whether uniformlydistributed or non-uniformly distributed the splitter is, the“on-and-off”control is feasible andthe result is obvious. When the switch is in“off”state, the output energy measured of thechannel is almost zero as low as 4-10 ; When the switch is in“on”state, the minimuminsertion loss is 0.08dB. Finally, with combination of photonic crystal splitting technology andphotonic crystal switch technology, the prospects of controllable photonic crystal beam splitter in the fields of FTTH and CATV are discussed.

Related Dissertations

  1. Research on the Application and Features of Two-dimensional Photonic Crystal,O734
  2. Research on the Polarization Error and Key Component of Optical Fiber Gyroscope,TN253
  3. Fluid-Structure Interaction in a Francis Turbine Runner of Splitter Blades,TK733.1
  4. Response of Imprinted Photonic Crystals for Nicotinamide in Aqueous Solution,O621.2
  5. Research of High Power All fiber Narrow-linewidth Laser and Supercontinuum Source,TN248
  6. Research on Subwavelength Optical Control Devices Based on Surface Plasmon Polaritons,TN256
  7. Study on Inner Flow Field and Performance of Centrifugal Pump with Splitter Blades Based on CFD,TH311
  8. A Study of GPU-based FDTD Method and Its Application in LED Performance Optimization,TN312.8
  9. The Investigation of Photonic Crystal One-Atom Laser by Quantum Theory,O431.2
  10. Study on the Preparation and Properties of Rare-earth Photonic-crystal Emitter,TN256
  11. Multi-quantum dot photonic crystal defect layer optical switches based on,TN929.1
  12. The Study on the Influence of Point and Line Defects on Characteristic of Non-linear Terahertz Modulator Based on Photonic Crystal,TN761
  13. Numerical Simulation on Photonic Crystal Fiber Gratings and Couplers,TN622
  14. Study & Design of the Interferometric PCF Grating Sensor,TN253
  15. Studies on Characters and Applications of Tapered Optical Fibers,TN253
  16. The Study on Characterisce of Multi-wavegength Phtonic Crsytal Wavelength Division Multiplexers Based Multimode Interference Thoery,TN929.11
  17. Research on Supercontinuum Generation in Photonic Crystal Fiber and BK9 Glass,O433
  18. Research of Parallel FDTD Algorithm Based on LAN,TP393.1
  19. Study on Novel Wavelength Convertor Based on Photonic Crystal Fiber,TN253
  20. Toyota carola electronic control engine fault diagnosis training platform design,U472.9
  21. A Study on Hardware-In-The-Loop Simulation of Electronically Controlled Suspension,U463.33

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Feeder equipment ( transmission lines and waveguides ) > Waveguide,the waveguide,the waveguide transmission line
© 2012 www.DissertationTopic.Net  Mobile