Dissertation > Excellent graduate degree dissertation topics show

Key Techniques of Active Power Filters Based on High Precision Control

Author: HongLei
Tutor: ChenGuoZhu
School: Zhejiang University
Course: Power Electronics and Power Drives
Keywords: Active Power Filter (APF) three-phase four-wire Shunt Hybrid Active Power Filter (SHAPF) Thyristor Controlled Reactor (TCR) Static Var Compensator (SVC) Proportion-Integral (PI) control Repetitive control Over-sampling THD
CLC: TM464
Type: Master's thesis
Year: 2012
Downloads: 224
Quote: 1
Read: Download Dissertation

Abstract


With the wide application of power electronic equipment in industry and daily life, grid harmonic pollution becomes increasingly serious. Active power filters, as power electronic equipment, can effectively solve harmonic problem. And, nowadays, it moves toward large-scale industrial application, based on the rapid development of the semiconductor and digital control technology. This paper focuses on the related techniques of active power filters, mainly including the control strategy of a three-phase four-wire shunt active filter with the dc-link composed by two capacitors connected in split, the high performance controller of the hybrid active power filter which is suitable for large capacity and high voltage application, and the high accuracy sample method in the digital control system of the active power filters.Firstly, in order to compensate any unbalanced harmonic load with a three-phase four-wire shunt active filter, this paper studies on the control strategy under the ABC coordinate frame, making each phase of the APF work independently. Based on the accurate model, the controller designs of current inner loop, maintaining voltage loop and equalizing voltage loop of DC-bus are given in details. Repetitive controller is introduced to the current loop control. It effectively improves the compensation accuracy. Simulation and laboratory results show the validity and feasibility of all the designs.Secondly, to find a high performance controller for a shunt hybrid active power filter which is suitable for large capacity and high voltage application, Repetitive controller is firstly adopted into the control of output voltage in the hybrid active power filter. It can largely improve the compensation accuracy.And design method of this controller and key parameters are studied. So as to solve the reactive over-compensation when merely using the shunt hybrid active power filter, a novel static var compensator combining hybrid active power filter and thyristor controlled reactor is presented. Simulation result in Matlab/simulink shows the feasibility of the related topology and control strategy.Finally, the high accuracy sample method in the digital control system of the active power filter devices is studied. As high power electronics equipment usually has low switching frequency, and the signal to noise ratio is indispensable in the THD calculation. Then a novel over-sampling method is presented. The theory is analyzed and some issues about the application of the new over-sampling method, taking the measurement of THD for example, are discussed. Through simulation and experiment, the data sampled by the conventional method and the new method is compared to demonstrate the advantage of the proposed method and its validity.

Related Dissertations

  1. Development of the Digitizer Based on PCI-E Bus,TP274.2
  2. An Approach for Identifying a Plant Resistance Gene Based on the Random Forest,Q943
  3. Study of Acoustical Signal Transmitter Which Based on Sigma-Delta Modulation,TN761
  4. Design of Receiving Processor on Radio Signal and Multi-Rate,TN851
  5. Dushanzi ethylene plant management research laboratory quality work,F426.72
  6. Bayesian methods under two ordinal value of multi-value data model with simultaneous identification of outliers,O212.1
  7. Research of Three-Phase Four-Wire Active Power Filter Based on Dual DSP,TN713.8
  8. Statistical Inference for Spatial Distribution of Rat Density in Three Gorges Reservoir Before and After Water Impounded,R184
  9. Research on Photoltaic and Its Key Technology,TM615
  10. The Design of a High Power Factor Correction Chip Based on L6562,TN402
  11. Statistical Methods for Sensitive Questions Survey in Two-stage Sampling and Its Application,R195
  12. The Ground Track Intuitive Orientation Method in Speed Roller Skating Pairs of Push Technology Teaching Application,G862.8-4
  13. Exam Quantity Analysis and Student’s Ability Assessment Based on IRT Model,G449
  14. Design of Static Var Compensator’s Digital Control System Based on dsPIC,TM761.1
  15. On Filtering Algorithm of UKF Based GPS/DR Integrated Vehicle Navigation System,TN967.2
  16. Research on Passive Sampling and Instrumental Determination of Formaldehyde Gas in Environment,X831
  17. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  18. Researching of Scheduling and Control Co-design Based on Variable Sampling Period in Networked Control System,TP273.5
  19. Asynchronous multi-sensor information fusion estimation sample,O211.6
  20. Quasi-Monte Carlo Method for the Structured Stochastic Variational Inequalities,O22
  21. Digital Delta Type UPS Design and Research,TN86

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter > Inverter
© 2012 www.DissertationTopic.Net  Mobile