Dissertation > Excellent graduate degree dissertation topics show

Control Technology for Square-wave Voltage Driven Multi-phase Induction Motors

Author: ZhangWanZuo
Tutor: ChenHuiMingï¼›WangZhengShi
School: Zhejiang University
Course: Power Electronics and Power Drives
Keywords: nine-phase induction motor concentrated winding square-wave voltage multi-phase Park transform air-gap mmf analysis space decoupling variable-speed drive multi-loop theory
CLC: TM343
Type: Master's thesis
Year: 2012
Downloads: 102
Quote: 0
Read: Download Dissertation

Abstract


Multi-phase machines can take the advantage of harmonic waves to enhance the electromagnetic torque. It is also noted that by employing multi-phase motor drive systems the required rating of power electronic components for given output powers can be reduced. Besides, multi-phase motor drive systems have a greater fault tolerance and higher reliability. All above leads up to an upsurge of interest in multi-phase motor drive systems.This paper focuses on the control strategy of nine-phase induction motor drive system which is supplied by square-wave voltage. The nine-phase induction machine, which has concentrated stator windings and squirrel cage rotator, is employed as the controlled plant. And the paper is organized as follows:General theory of electric machines provides mathematical representation of a multi-phase induction motor. By applying multi-phase Park transform, the general representation is mapped into different harmonic planes. Based on space decoupling method, the mathematical model of the nine-phase induction motor is derived.The theory of multi-phase motor drive system with square-wave power supply is highlighted in this section. Firstly distribution of time harmonic and space harmonic in the air-gap field is studied in detail. In order to research the flux density of the air-gap field, different stator voltage is then supplied separately into nine-phase induction motor and the relative flux density waveform is studied.Emulation of the nine-phase induction motor drive system is accomplished in MATLAB Simulink environment. Corresponding experimental hardware platform and program flow is designed and realized as well. Emulation results and experimental results are presented at the final, which prove the correctness and accuracy of the theory.

Related Dissertations

  1. Research of Direct Torque Control for Nine-phase Induction Motor,TM346
  2. Belt variable speed drive systems research,TH222
  3. Two-stage matrix converter - induction motor direct torque control strategy,TM921.5
  4. Recognition Study of Turbo-generator Rotor Winding Inter-turn Short Circuit Fault Based on Multi-loop Theory,TM311
  5. Research on Internal Electrical Faults of Synchronous Generator,TM307.1
  6. Study on the Minimum Safe Clear Distance and the Length of Speed Change Lane in Interchanges,U412.352.1
  7. Study and Disucss on the Minimum Spacing in Mountains Highway Interchange,U412.352.1
  8. Design, Analysis and Control of Permanent Magnet Synchronous Motor in Electromechanical Actuator,TM341
  9. Study on In-slot Winding Stator Production Process and Quality Control Method,F426.6
  10. Research on Optimization Strategies of Efficiency of Water Plant Loop in Heating Ventilating and Air Conditioning System,TU831.3
  11. Variable Speed ??Drive Bearing Design Theory,TH133.3
  12. Analysis and Diagnosis on the Internal Faults in Stator Windings of the Synchronous Machine,TM341
  13. The Research on Induction Motor Direct Torque Control on Fuzzy Neural Self-adaptive Methods,TM346
  14. Study on Injection Voltage Scheme for Rotor Earth-fault Protection of Generator,TM862
  15. New research multiplex inverter charger,TM910.6
  16. Analysis of Speed Control Performance of Hydroviscous Variable Speed Drive and Application in Colliery Conveyor Equipment,TD50
  17. The Study on the Design of Hydrostatic Mechanical Transmission and Speed Control System,TH137
  18. The Dynamic Simulation of the Shifting Driver Bearing,TH133.3
  19. Research on Control Strategy of E.T.Driver Based on AMT in Parallel Hybrid Electric Vehicles,U469.7
  20. Study on Intelligent Control of Metal Pushing V-belt Type CVT,U463
  21. Simulation Research on the Energy Saving Control Technology for Motor Based on Simplorer,TM343
  22. Study of Low Speed Control Strategy on Induction Motor Speed Sensorless,TM343

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Induction motor
© 2012 www.DissertationTopic.Net  Mobile