Dissertation > Excellent graduate degree dissertation topics show

Arithmetic and Experimental Study of Electrode Wear in Micro Ed-Milling

Author: JinFangJin
Tutor: PeiJingYu
School: Shanghai Jiaotong University
Course: Mechanical Manufacturing and Automation
Keywords: micro-EDM electrode wear conical bottom compensation
CLC: TG661
Type: Master's thesis
Year: 2012
Downloads: 83
Quote: 1
Read: Download Dissertation

Abstract


Micro electrical discharge machining (micro-EDM) is a very important method in the manufacture of micro three-dimensional structures. Scholars around the world attach much importance to it. The difficulty machining micro 3D structures is greatly increased due to the serious electrode wear in micro-EDM. This paper makes deep research on electrode compensation method for micro-EDM.First this paper studies the model of bottom surface profile in ED-milling, gives the formula of the profile trajectory, analyses the process of electrode bottom becoming a conical shape under fix-length compensation method combined rotating tool electrode, and researches the factors influencing the angle of electrode bottom.Then according to characteristics of conical bottom electrode, the mathematical model of fix-length compensation is established in electrical discharge milling (ED-milling), and the algorithm of compensation length is given. Then this paper obtains a precise way to measure the volume relative wear ratio based on the simulation and experiment. After milling using conical bottom electrode, there is serrated protrusion remained. So this paper proposes the fix-length compensation method approximate conical bottom electrode. Then a method that combines the uniform wear method and the fix-length compensation method is applied to cut away the final residues after two turns processing. The experimental results are basically consistent with the theoretical results. Finally, a tungsten microelectrode is made on-the-machine by using the Block electrode discharge grinding (BEDG). Through the experiments, it can be concluded that the compensation based on the conical bottom electrode is accurate and effective in micro ED-milling.

Related Dissertations

  1. Study on Springback of High-Strength Steel Stamping,TG386
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on Power Supply of Contactless Power Transfer System,TM46
  4. The Design and Implementation of the Single-chip MPEG2 Video Encoder,TN919.81
  5. Analysis on Executive Officer Compensation Incentive System Performance-Based in Commercial Banks,F832.2
  6. Design and Application of Scope Anti-Shake System,TH743
  7. Study on Executive Compensation Incentive System in Chinese Listed Companies on the Basis of Enterprise Value,F832.51
  8. A Study on the Relationship between CEO Pay and Firm Performance of the State-owned Listed Companies,F276.6;F224
  9. Research of MSC Dynamic Reactive Power Compensation System in Mine Electric Power Network,TM761.1
  10. The Study on the Characteristice and Control Strategy of Load Simulation System with Rotating Specimens,TH87
  11. Studies on Medical Injury Compensation System in the Background of "Tort Liability Law",D923
  12. Problems of collective land acquisition compensation analysis,F301
  13. Research of the Tramcar Connect Device Strength Testing System,TD524.2
  14. Method and Application on Compensation of Ore-dressing Process Integrated Production Indices Decomposition,TP311.13
  15. Research on the Water Quality Bidirectional Ecological Compensation Mechanism in Jiangsu Province,X171.4
  16. Research on Whispered Speaker Identification in Channel Mismatch Conditions,TN912.34
  17. Study on the Environmental Cost on the Basis of Environmental Systems Reproduction Theory,F406.72
  18. The Research of Credit Construction in the Problem of National Student Loan,G647.5
  19. Nature Reserves in China Ecological Compensation System,X36
  20. The Historical Investigate of Gu Tian Reservoir Region Migration,D632.4
  21. The Research of Ecological Compensation on the Restoration of Water Quantity in the Man-Made Seasonal Rivers,X143

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Electric machines and their processing
© 2012 www.DissertationTopic.Net  Mobile