Dissertation > Excellent graduate degree dissertation topics show

The Investigation of Flat Tea-automatic Fixation-shaping Machine with High Efficiency, Save Energys, Sloping and Multi-pot

Author: LiGuoYi
Tutor: LiGe
School: Zhejiang University of Technology
Course: Mechanical Design and Theory
Keywords: Crank up the management of the machine automatically Non - circular gear Slider-crank Vibration The efficiency of the management Article
CLC: TS272.3
Type: Master's thesis
Year: 2010
Downloads: 63
Quote: 0
Read: Download Dissertation

Abstract


Flat tea is a fine varieties of green tea , tea products , has an important position . With the social demand for tea increased every year , tea cultivation, processing has formed a huge industry . Flat tea process is a complex process , including : crank , bar manager , flattening forming , shaping, drying, etc. , multiple process steps are required to complete . Fixing reasonable bar is an important step in tea processing is very important to solve the existing problem of fixing reasonable bar machine . New processing tea machine automatically crank up the management of the machine is a combined process of fixing and reasonable bar , it has the process is simple, easy to operate , good fried tea . However , the movement of its groove pot or through the traditional slider-crank mechanism , vibration work , tea rationale Article efficiency needs to improve . To this end , this paper presents the application of the the noncircular gear Linkage driver slot pot movement method . By studying the works of the non - circular gear , the driving groove pot movement of non- circular Gear Linkage and movement requirements automatically crank up the management of the machine process , solved the main non-circular gear mechanism , driven gear pitch curve equation; Linkage analysis of the force and kinematic model of the tea in the pot pot the body of the multi-slot and get the noncircular gear linkage and slider-crank mechanism driven groove pot kinematic analysis : non-circular gear rationale Article slider-crank mechanism , the noncircular gear Linkage vibration also less than the slider-crank mechanism . MATLAB programming for non- circular gear tooth profile design , and through the completion of the three-dimensional modeling software UG dimensional modeling of the main driven non - circular gear . ADAMS software simulation analysis of the kinematics of the non - circular gear , get theoretical analysis of the experimental data with a virtual prototype basically the same conclusions . Automatically crank up the current management of the machine there is a problem on the basis of the full study , the design of a new automatic crank up management of the machine - the the three groove pot balanced reciprocating automatically crank up the management of the machine . The three slots pot balanced reciprocating automatically crank up the management of the machine works , and declared a national utility model patents and two patents of invention patents ( 200910152413.0 ; 200,920,195,803.1 ) .

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  4. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  5. Research on Structural Vibration of Steam Piping System,TK284.1
  6. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  7. Closed thin-walled beams composite modal damping prediction,TB33
  8. Axial fan blade vibration non-contact measurement,TD441.2
  9. Research on the Prediction of Underwater Acoustic for a Survey Ship and Reduction for Its Noise and Vibration,TB53
  10. Experimental Research on Automobile Engine Inertia Parameters Identification,U467.2
  11. Analysis and application of large structure vibration test based on wireless sensor networks,TP274
  12. Vibrating force field mixed mechanism of plastic extrusion process,TQ320.66
  13. Anlysis and Control the Noise of Low Pressure Gear Pump,TH325
  14. The Vibration Synchronization and the Control of Amplitude in Sharp Resonance Vibration Machine,TB535
  15. Vibration Isolation Design of Powertrain Mounting System of a Commercial Vehicle,U463.33
  16. Random Vibration Response Control and the Patran Redevelopment,O324
  17. Study on a Portable Measurement and Analysis Instrument for Ships Shafting,U664.21
  18. The Research on Vibration and Sound Radiation from Single and Double Cylindrical Shells under Multi Forces,U661.4
  19. Study on Defect Inspection of Flip Chip Based on Ultrasonic Excitation,TN407
  20. Research on Distributed Fiber Optic Vibration Sensor,TP212.14
  21. Research on Vibration Checkout Gear of Marine Propulsion Shafting,U661.75

CLC: > Industrial Technology > Light industry,handicrafts > Food Industry > Beverage cold manufacturing industry > Tea > Machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile