Dissertation > Excellent graduate degree dissertation topics show

The Research of Organization and Mechanical Properties of New Maraging Stainless Steel

Author: ZhenCaiXia
Tutor: JiangYue
School: Harbin University of Science and Technology
Course: Materials Physics and Chemistry
Keywords: Mraging Sainless Seel Mchanical Poperties Oganizational Sructure Cyclic Transformation Refine of Grain
CLC: TG142.71
Type: Master's thesis
Year: 2010
Downloads: 194
Quote: 1
Read: Download Dissertation

Abstract


Maraging Stainless steel is developed based on maraging steel, which has all the advantages of maraging steel and a certain degree of corrosion resistance, and whoes strength is generally between 1300~1500MPa. Maraging stainless steel has become the direction of an ultra-high strength steels on a high-strength stainless steel, which has been applied broadly in the aviation, aerospace and other tip-realms, as well as petroleum, chemical industry, and machinery manufacturing and other civilian areas.In this paper, the present alloy melted is a maraging stainless steel whose nominal composition is 00Cr13Ni7Co5Mo4Ti and the purpose is study ultra-high strength and tougness maraging stainless steel. By means of metallographic microscope (OM), Scaning electron microscope (SEM), tranxmission electron microscope (TEM), selected area electtron diffraction (SAED), X-ray diffractometry (XRD), universal material testing machine, Rockwell hardometer and other mechanical property analytical methods, the effects of solution treatment and aging treatment on microstructure and mechanical properties of maraging stainless steel were studied. The thermodymamic software Thermo-Calc was used to analogue the change of precipitated phases among the solution and aging process. Finally, the grain refinement process was studied.The results of mechanical property indicated that the best heat treatment craft of 00Cr13Ni7Co5Mo4Ti maraging stainless steel is solution treatment at 1050℃for 1h and aging treatment at 450℃for 9h, under which maraging stainless steel can be achieved good tenacious performance and strength of extension is 1670 MPa and yield strength is 1510MPa, and elongation and reduction of area are 12.1% and 55.6% separately, and notched bar impact strength can reach 100J/cm2.Microscope structure display that solution temperature has relatively minor impact on the solution organization of maraging stainless steel and the pattern and space length of martensite lath are not vary with the increment of solution temperature. The microscope structure of maraging stainless steel is fine martensite structure and small quanlity residual austenite after aging treatment. Reversed austenite distributed around the lath martensite as the shape of thin slice, which is very beneficial to improve the toughness of the material. TEM observation and selected area electron diffraction analysis of the specimen show that the precipitated phase of maraging stainless steel isη-Ni3Ti of hexagonal structure, and which is the same with the thermodynamic calculations. The precipitated phase Ni3Ti is strip whose length orientation and [111]M of martensite matrix is concordance.Using the new process of variable-temperature cyclic transformation recrystallize refine grain utilized the principle of cyclic transformation refine of grain can refine the grain of maraging stainless steel and finally obtain an average grain size of about 7mm, which increase the strength and plasticity to different extent. Finally, the strength of extension is 1850 MPa and yield strength is 1659MPa, and elongation and reduction of area can reach 12.2% and 61.1% separately.

Related Dissertations

  1. Study on Alloying of 2Cr13 Martensitic Stainless Steel for Oil Country Tube Goods Use,TG142.71
  2. Study on the Dry Cutting Performance of Austenitic Stainless Steel 0Cr18Ni9,TG142.71
  3. 2205 Corrosion Research,TG142.71
  4. 2205 hot workability and mechanical properties of stainless steel clad plate and Prediction,TG142.71
  5. Nuclear reactors with the mechanical behavior of austenitic stainless steel,TG142.71
  6. High nitrogen nickel austenitic stainless steel microstructure and performance analysis,TG142.71
  7. 7Cr14Mo dual vacuum stainless bearing steel organization and contact fatigue life,TG142.71
  8. Study on the High Temperature Brittleness and Optimization of Solution Treatment Temperature of Maraging Stainless Steel,TG142.71
  9. Effects of Ce on the Microstructure and Properties of 202 Stainless Steel,TG142.71
  10. Research on High-temperature Physical Properties and Mechanical Properties of Stainless Steel,TG142.71
  11. Sintering properties and corrosion resistance of the carbon content of the MIM stainless steel,TG142.71
  12. A Study of Low Cycle and Thermomechanical Fatigue Behavior of Z2CND18.12N Autenitic Stainless Steel,TG142.71
  13. Investigation on Hot Deformation Behavior of Ferritic Stainless Steel,TG142.71
  14. Study on Properties of New Seawater Resistant Stainless Steel,TG142.71
  15. The Research of Mechanism of Rare Earth in 430 Ferrite Stainless Steel,TG142.71
  16. Study on Texture and Microstructure of 436 and 432 FSS during Processling,TG142.71
  17. Research of Microalloying Nb and Ti in Ultra-purity 430 Ferritic Stainless Steel,TG142.71
  18. Of titanium and nitrogen ion implantation 304 friction and wear properties,TG142.71
  19. The Irradiation Effects of Charged Particles on 1Cr18Ni9Ti Stainless Steel,TG142.71
  20. Plasticity Performance of OCr15Ni5WMoVNb Martensite Precipitation Hardening Stainless Steel,TG142.71

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Steel > Special performance of steels > Stainless steel, acid-resistant steel
© 2012 www.DissertationTopic.Net  Mobile