Dissertation > Excellent graduate degree dissertation topics show

Research and Optimization of Resistance Spot Welding Process of Hot-stamped Steel B1500HS

Author: YangLiu
Tutor: WangMin
School: Shanghai Jiaotong University
Course: Materials Engineering
Keywords: hot-stamped steel resistance spot welding power-frequency alternating current mid-frequency inverter mechanical properties microstructure
CLC: TG453.9
Type: Master's thesis
Year: 2012
Downloads: 109
Quote: 0
Read: Download Dissertation

Abstract


With the advantages of high strength and hardness, the hot-stamped steel which is composed of martensite plays a more and more important role to meet the demand of lightweight and safety in automotive industry. Resistance spot welding is typically employed to join structural steel components in the large-scale automatic production of vehicle. Compared with ordinary steel, the weldability of hot-stamped steel is greatly different, and there are many other problems during the welding process, such as softening of heat affected zone, embrittlement of nugget, splashing and so on. So it’s significant to research the mechanical and microscopic properties of the resistance welding spots of hot-stamped steel, and obtain the perfect welding parameter.In this paper, resistance spot welding of B1500HS hot-stamped steel with 1.5mm has been researched, using the power-frequency alternating current welding equipment and the mid-frequency inverter one. The tension strength, hardness distribution, microstructure and the cross-tensile fracture appearance have been analyzed. The test results show that the hot-stamped steel has good weldability, and the nugget diameters and tensile shear strength both meet production requirements. The microstructure of spot welded metal is martensite. It’s easy to get button fracture mode and shear dimples. The cross-tensile strength has sharply decreased, mainly as a result of the existence of softened zone near heat affected zone.Hot-stamped steel is wildly used in some critical structural components to enhance strength of vehicle, which needs that it must have good resistance spot weldability with different materials. In this paper, resistance spot welding of hot-stamped steel with 2.0mm and H240LAD+Z ordinary low-carbon steel with 0.8mm and 1.5mm have been researched. The tension strength, hardness distribution, and microstructure of welding spots have been analyzed, and obtain the perfect welding parameter. The results show that mechanical and microscopic properties of nugget has been greatly improved under the optimized parameter, and there is no splash during the welding process.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  7. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  8. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  9. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  10. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  11. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  12. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  13. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  14. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  15. Research on Mechanical Properties of Concrete with Multi-Component Admixture,TU528
  16. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  17. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  18. Research on Operational Life Span and Applications of Coated Electrode Resistance Welding for Galvanized Steel,TG453.9
  19. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  20. Study on Morphological Evolution and Toughening Mechanism of Sandbag Microstructure-toughened PA6/EPDM-M/nano-CaCO3 Ternary Composites,TB33
  21. The Photoluminescence of H1.77 [Sr0.8 Bi0.21Ta2 O7] Nano-layers Annealing under Different Temperatures and the Effect of the Cu2O Addition on Its Photocatalytic Activity,O482.31

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding process > Pressure welding > Other pressure welding
© 2012 www.DissertationTopic.Net  Mobile