Dissertation > Excellent graduate degree dissertation topics show

Mechanism Analysis of Vibrating Crack on the Mill’s Pipeline

Author: DaiYong
Tutor: WangXuYong；TaoJianFeng
School: Shanghai Jiaotong University
Course: Mechanical and Electronic Engineering
Keywords: Pipeline vibration Fluid-solid coupling Accumulator Simulink simulation
CLC: TG333
Type: Master's thesis
Year: 2012
Downloads: 67
Quote: 0
Read: Download Dissertation

Abstract


The iron and steel industry plays an important part in the national economy. The mill, as an important component in the iron and steel industry, affects the quality of the steel plate directly. For many reasons, the mill system suffers from vibration and burst accidents easily, which brings great loss to the company. Thus it is of vital importance to analyze the mechanism of the vibration systematically.To meet the requirement of the Baoshan Iron and Steel Corporation, we take a research on the mechanism of the vibration accidents which happened in the company recently. Since June 2010, several vibration and burst accidents happened to the Baoshan Iron and Steel Corporation and made the mill system shutdown for several times. These accidents all happened in the relatively weak components such as the elbow and the accumulator. The accidents are thought to be caused by the hydraulic components of the mill system, thus in this paper the pipeline before the valve, the pump, the accumulator and the screw down system have be studied, as well as a series of improvement measures been concluded.In chapter 2, the impedance method has been used to deduced the impedance of the pipeline, and the resonance length of the pipeline has been calculated for further design. The comparatively perfect fluid-solid coupling method has been introduced for modeling. The flow pulsation of piston pump and the constrain condition of the bracing position have also been analyzed, which must be taken into consideration when modeling.In chapter 3, the traditional method for parameters setting as well as its deficiency is introduced. Then integrated model-based method for setting the parameters is proposed, which uses approximation method to deal with the pipeline component and uses the genetic method to optimize the parameters. Because the method is based on the model of the whole system, more suitable parameters are hoped to be obtained.In chapter 4, the control strategy as well as components of the screw down mill system has been introduced. Then in chapter 5 Simulink has been used to simulate the system in order to find out the reason to cause the vibration in this part. Finally theoretical explanation of the reason has been given.In chapter 6, the reasons that cause the vibration of the pipeline that is before the valve have been concluded systematically. The suggestions to improve the vibration accidents of Baoshan Iron and Steel Corporation have been given, and the reasons for the measurement have been analyzed.

Related Dissertations

  1. Simulation Research on Hydraulic System of Extra-High Pressure Water Jet Equipment,TH137
  2. For small unmanned helicopter SINS / GPS Integrated Navigation System,TN967.2
  3. Space Station Zero Fuel Maneuver methods,V448.2
  4. Research on Performance Matching of Electric Auxiliary Driving for Wheeled Milling Machine,U415.52
  5. Skid steer loader working device damping system design and research,TH243
  6. Kawanishi repeated stress fields of fractured gas wells,TE357
  7. Service Life Analysis of Drilling Pump Valve and Research on Vibration Control of Piping System,TE926
  8. Development of Electro-Hydraulic Proportional Lift System for Simulation Test Rig of Sucker Rod Pump Units,TE933.1
  9. Frequency electric forklift lift system with accumulator Energy Research,TH242
  10. Research on Safety Operation of Two-Phase Flowing Pipeline Based on Vibration Test,TE89
  11. The Study and Implement of Control System of Large Hydraulic Press,TP273
  12. Research and Experiment on Acceleration Principle of 120-ton Injection Molding Machine Using Accumulator,TQ320.52
  13. Vibration Reduction Analysis and Research of Wheel Loader at the Condition of Working,TH243
  14. Study of Intelligent Irrigation Control System Based on Fuzzy Control,TP273.4
  15. Simulation Study on Adaptive Control for Manipulator of Wheel Loaders,TH243
  16. 80 wheel loader drivetrain performance simulation,TH243
  17. Calculation and Analysis Based on the Internal Flow Field Simulation on Critical Rotational Speeds of the Centrifugal Pump Rotors,TH311
  18. Analysis of Slope Stability on Account of Fluid-Structure Coupling Seepage Effect,TU43
  19. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  20. Analysis and Simulation of Parallel Hydraulic Hybrid Heavy Vehicle,U469.65
  21. The Research and Simulation of Loop-control Electro-Hydraulic Proportion Complex Pump’ Feature,TH137.5

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling mill machinery equipment
© 2012 www.DissertationTopic.Net  Mobile