Dissertation > Excellent graduate degree dissertation topics show

Research of Cathode Cleaning and Weld Bead Formation During AC TIG Welding

Author: YuZhongGui
Tutor: HuaXueMing
School: Shanghai Jiaotong University
Course: Materials Engineering
Keywords: AC TIG welding of Aluminum alloy Cathode Cleaning EP% weld formation
CLC: TG457.14
Type: Master's thesis
Year: 2012
Downloads: 94
Quote: 0
Read: Download Dissertation

Abstract


AC power supply is widely used to weld aluminum and its alloy for the cathode cleaning phenomenon during which the surface oxides can be cleaned during the direct current electrode positive (DCEP) polarity. However, there are still many controversy over cathode cleaning, especially in the influencing factors, cleaning process and mechanics. Based on experiments, the influence of several welding parameters on the cathode cleaning effect are studied and the relationship curve are obtained, then the cathode cleaning mechanics and the cleaning process was studied.In this work, a simple criteria is raised to evaluate the cleaning effect. Both the width of the cleaning zone and molten pool are taken into account during the study of the influence of the welding parameters on the cathode cleaning effect. The influencing welding parameters of the cleaning are determined and the relations between the welding parameters and the cleaning effect are obtained. a vision system is designed to observe the molten pool and the cathode cleaning zone, and clear images are obtained, this will pave the way for the intelligent control of the cathode cleaning effect.Clear images of the cathode cleaning spots have been captured by a fast speed vision system, and the behavior of cathode spots is observed. The surface micro-topography of the molten pool and the cleaning area are examined by scanning electron microscope, and after cathode cleaning the oxide is found in two forms: the remaining oxide layer and the white oxide particles. It is suggested that the craters of the cathode spots are in the area adhering to the base metal. The formation process of the cleaning area surface and the cleaning process are explained.In addition, It’s conventionally thought that the width and penetration of the weld bead will increase as a function of the increase of electrode positive polarity time in a period(or EP ratio),while in this research results contrary to conventional expectations are obtained, only several recent literatures agreed with this report. And in the article the effect of the EP ratio on the Voltage, the Current, the arc status and the heat generation and distribution is studied and the experiment result is well explained from theoretically perspective.

Related Dissertations

  1. Performance Study and Preparation of Different AW & EP Additives for Aviation Lubricating Oil,TE624.8
  2. Research on Preparation and Application of Sulfur-containing Lubricanting Oil Additive,TE624.82
  3. Preparation and tribological properties of WS_2 high temperature lithium grease,TH117.2
  4. The Effect of Low and Moderate Exercise on β-endorphin、Corticosterone and IL-1 β、2 in Rats after Mental Stress,G804
  5. The Effect of Motion Regulated Teaching Mode on Junior School Students’Mental Health in Athletics,G807
  6. Preparation of Coated Photocatalysts and Degradation of Oil,X703.5
  7. Exploration of High-risk Factors of Ectopic Pregnancy in Vitro Fertilization and Embryo Transfer,R714.8
  8. Numerical Simulation of Weld Formation in Laser+GMAW-P Hybrid Welding,TG456.7
  9. Microstructure and Properties of Ni-Based Alloy Sheet Prepared by EB-PVD,V252
  10. Research on Real-time Seam Tracking and Control Method of Weld Formation for Arc Welding Robot Based Vision Sensing in Aluminum Alloy,TP242.2
  11. Relations between Serum 5-HT, β-EP, Genital Hormones and Excess Cold of Emmeniopathy,R271.1
  12. Study on Forming Mechanism and Eliminating Methods of Weld Line on Injection Molding Parts,TQ320.66
  13. Clinical and Experimental Study of Tongluo Sanjie Tincture in Treating Cancer Pain,R273
  14. The Effect of Naloxone on β-endorphin of Alcoholic Fatty Liver in Rats,R575.5
  15. Study on Hygrothermal Residual Stress of Carbon Fiber/epoxy Resin Composites with Finite Element Analysis and Micro-raman Spectroscopy Characterization,TB332
  16. The Clinical Observation of Protrusion of Lumbar Intervertebral Disc by Acupuncture Combined with Acupoint-injection of Ossotide Injection and the Effects on Concentration of Plasma β-EP、CGRP,R246.9
  17. Theory and Perturbation Analysis for a Class of Singular Linear Equations,O241.6
  18. Electro perimenopausal depression rat behavior and brain β- endorphin and other indicators in rats,R245
  19. Effects of Recombinant Human IL-1α on Function and Prostaglandin E2 Receptors-G Protein-cAMP Signal Transduction in Fibroblast-like Synoviocytes from Human and the Effects of Paeoniflorin,R285.5
  20. The Mechanisms of rSNSR1 on CFA-evoked Inflammatory Pain,R363
  21. Research on the Preparation and Properties of Insulation Board Made by Silicon Calcium-Expended Perlite,TU551

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding process > Welding of a variety of metal materials and components > Welding of metallic materials > Aluminum
© 2012 www.DissertationTopic.Net  Mobile