Dissertation > Excellent graduate degree dissertation topics show

Application of Conversion Technology in Large-scale Grounding Inpedance Measurement

Author: ZhuHongFa
Tutor: MaZuo；ShenQunWu
School: Zhejiang University
Course: Electrical Engineering
Keywords: Large Grounding Impedance Measurement Frequency Conversion 30°Angle Method
CLC: TM934.7
Type: Master's thesis
Year: 2011
Downloads: 27
Quote: 0
Read: Download Dissertation

Abstract


With the growing maturity of China’s electric power system, grounding impedance measurement has getting more and more attention and become a major issue for the safe and reliable operation of power systems. The national《power industry standard DL/T 475-2006》and《the transfer of electrical test equipment standard GB50150-2006》both require the grounding impedance measurement. China usually carry out the test as soon as possible after the completion of construction according to《earthing construction and acceptance of GB50169-2006》in order to arrange time to reconstruct it.Ground state of the device is directly related to the safe operation of power systems. It is very important to make a scientific and rational test for a variety of parameters for the grounding device and make an accurate evaluation of its condition.《power industry standard DL/T 475-2006》recommends the use of different frequency current method to test the frequency of large grounding device parameters and with more attentions from the industry, the current inverter technology at home and abroad grounding impedance measurement has been widely used and has good results. During the construction of the substation, the qualification of the laying of the ground network has something to do with the safety of the operation of the equipment and personal safety. The size of grounding impedance is the only measurement for the qualification of the grounding laying. For large grounding device for substation, the grounding impedance test is the most important work. But much interference caused by the dense and complex network structure seriously affects the accuracy of the test results.In this paper, firstly, by comparing with the traditional method of ground resistance testing, we use the grounding of a large selection of frequency 30°angle method. And then the paper describes the experimental ground impedance test procedures, after that the article focuses on the grounding impedance test procedures, equipment operation and note.At the end of the paper, it provides the experience for wide use of the ground impedance test and the several solutions to the too-large ground impedance.

Related Dissertations

  1. Research on Process Optimization of Turbulence Pickling by Hydrochloric Acid Based on Frequency Conversion Technology,TG335.1
  2. Investigation on Application of Frequency Conversion Power Supply in Partial Discharge Measurement of Power Transformers,TM855
  3. Designe of Intelligent Constant Pressure Frequency Conversion Water Supply and Security System,TV675
  4. IGBT Multilevel-Technology in the Pumped Storage Unit Start-up Mode of Applied Research,TV734
  5. Research on Shock Vibration Test Control System of Multiple-Input & Multiple-Output,TB535
  6. Recognition Method of Breast Tissues Based on BP Network Using Bio-impedance Information,TP183
  7. Research and Engineering Application of Intelligent Ultra High Voltage Frequency Convertion Resonant Test Power Supply,TM832
  8. The linear casting machine dynamic characteristics and anti - crawling technology,TG23
  9. Photonic crystal fiber double zero dispersion and nonlinear properties of theoretical and experimental studies,TN253
  10. Explosion Suppression Speed Regulation by Frequency Variation Motor Design and the Research on Temperature Field,TM343
  11. Jigger constant surface speed control of constant tension,TP273.5
  12. Study on Detection Method of Cardruvaular Function Based on Information of ECG and Bioelectrical Impedance,TP274.5
  13. Industrial air conditioning frequency energy bus control technology research and system implementation,TP273.5
  14. Synthesis and Design of Microwave Dualband Filters,TN713
  15. Starting-up and Adjusting Speed of AC Motor of Electrical Propeller for Ship,U664.14
  16. Design and Implementation of Online Detection System of Single Fuel Cell Resistance,TM911.4
  17. The Electrical Control System Design of High-speed Paper Cutting Machine,TP273
  18. The Research, Realization and Performance Test of Special Inverter for Air Compressor,TN773
  19. The Experimental Study on Operating Characteristics of Pump Group of the Air-conditioning Chilled Water System,TU831.3
  20. High Pressure Common Rail Injector Test Stand Development and Research,TK423
  21. Research and Application on Frequency Control of Condensate Pump for Million Power Plant,TM921.51

CLC: > Industrial Technology > Electrotechnical > Electrical measurement techniques and instruments > Lumped parameter,the distribution parameter measurement and instrumentation > Standing waves,impedance measurement and instrument
© 2012 www.DissertationTopic.Net  Mobile