Dissertation > Excellent graduate degree dissertation topics show

Thermal Ratchetting Study of Cylinder with Circumferential Welded Structure Subjected to a Moving Axial Temperature Front

Author: SunYuPeng
Tutor: GaoBingJun
School: Hebei University of Technology
Course: Chemical Process Equipment
Keywords: Coke drum ratcheting cyclic plasticity finite element method Axial temperature gradient bulging
CLC: TQ520.5
Type: Master's thesis
Year: 2011
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


Coke tower is the core equipment coke process and use one of the worst equipment environment in multiphase environment, long-term experience severe pressure circulation and thermal circulation, can produce weld cracking and cylinder tower festival bouffant deformation. In order to establish to ratchet effect on comparatively accurate structure and comprehensive estimate of constitutive model, it is necessary to materials in different temperature cyclic plastic behavior of in-depth system.Experimental mother materials at home and abroad material selection of coke tower typical material 1.25Cr0.5Mo alloy steel, Through the MTS 810 electro-hydraulic servo tester materials in 20℃, 200℃, 300℃and 480℃temperature conditions such as a series of uniaxial cyclic ratchet experiment. Test results show that: 1.25Cr0.5Mo alloy steel is a kind of circulation stabilization materials, and is the rate-independent; Weld and heat affected zone metal exhibited weak circulation weakening behavior, but overall as circulation stabilization. Uniaxial cyclic ratchet effect in experiments, with the increase of average stress, peak stress and stress amplitude, ratchet strain increases; Ratchet deformation is dependent upon loading history, previously large cyclic stress on subsequent smaller cyclic stress deformation under ratchet up the inhibition.According to the tensile experiments and ratchet experiment data further identified Chaboche model, O- W model and double linear servo improved model (BKH) finite element analysis model of model parameters, O - W II model can of material uniaxial ratchet strain preferable forecasting. Using the self-designed mobile temperature loading devices in resistance strain gauge, experiment on the temperature of axial movement under the action of weld cylinder with rings are tentative circulation ratchet effect experimental research, and put forward some reasonable suggestion for improvement.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  4. Finite Element Analysis and Optimization Design of Flat-head Tower Crane’s Rotating Platform,TH213.3
  5. Application of Vector form Intrinsic Finite Element Method in the Analysis of Cable Membrane Structures,TU399
  6. Tower-belt Structural and Dynamic Characteristics Simulation Analysis,TH213.3
  7. BV Regularization Method for the Function Reconstruction from Noisy Local Averages,O174
  8. Space hyperspectral imager Compensation focusing optical system of pre-,TH743
  9. Finite element analysis of gear transmission machine and Kinetics,TH132.41
  10. Rolled magnesium alloy ratcheting behavior and microstructure simulation,TG339
  11. Small aperture glass-ceramics based on helium-neon laser fundamental transverse mode selected experimental study,TN248
  12. Structural Analysis and Optimization Design for Single-girder Gantry Crane with Double Hook,TH213.5
  13. Torsion Fatigue and Multiaxial Ratcheting Fatigue of Lead-free Solder,TG425
  14. A Study on the Uniaxial Ratcheting Behavior of Austenitic Stainless Steel Z2CND18.12N,TG142.71
  15. Damping properties of ceramic matrix composites research,TB332
  16. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  17. Design and Optimization of Electrical Motors Based on Finite Element Analysis of Temperature and Structure,TM302
  18. Simulation Study on the Preparation Method of the Large-sized Ceramic Structure,TQ174.1
  19. Study on Analytical Models and Influential Factors of Thermal Stress in Tube Sheet of Heavy Duty Heat Exchanger,TQ051.5
  20. Research on Multi-scale Properties of 2.5D Woven Composites,TB332
  21. Metamaterials and Its’ Numerical Calculations,TB34

CLC: > Industrial Technology > Chemical Industry > Coke chemical industry > General issues > Machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile