Dissertation > Excellent graduate degree dissertation topics show

Analysis of Optical Target Simulate System and Structure Optimization

Author: WangTao
Tutor: JiaHongGuang
School: Graduate Schoo,Chinese Academy of Sciences
Course: Mechanical Manufacturing and Automation
Keywords: Simulation of hardware in-the-loop Target motion simulation system Visual target simulator Structural Optimization
CLC: V216.8
Type: Master's thesis
Year: 2010
Downloads: 73
Quote: 0
Read: Download Dissertation

Abstract


During the development of aircraft, physical test is time-consuming and costly. The appearance of hardware in-the-loop system gives an effective solution to this problem. The hardware in-the-loop system is mostly composed of target motion simulation system, aircraft attitude simulation system, loaded force moment simulation system and the trajectory simulates system. In this system, the performance of entire aircraft can be test and it can save much time and money, so the system is taken more and more seriously by most country. As an external field environment simulator, the target motion simulation system plays a vital role in the hardware in-the-loop system, and it is necessary to carrying out detailed analysis on it. The realizing way, determination of indices and the development of target simulator are the main contents of this paper.In this paper, the program of two-dimensional turntable add target simulator be proposed and demonstrated after compared variety of ways of target simulation. The parameters of the two-dimensional turntable are determined according to the parameters of Seeker. Indicators of the target simulator are demonstrated and determined according to parameters of the two-dimensional turntable and seeker. Visual target simulator is developed by cooperation of optical R & D center and our department. The performance indicators were satisfied with design requirements through analysis. Quasi-static case analysis and modal analysis of the visual target simulator are made on the basic of structural design and finite element modeling. The feasibility of the initial design are verified. Constraints and boundary conditions of target simulator for structural optimization are determined through comprehensive errors analysis of the two-dimensional turntable and the optical target simulator, and then optimal design for a lightweight is excuted.

Related Dissertations

  1. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  2. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  3. The Finite Element Analysis and Structural Optimization of Aluminum Tank Semi-Trailer,U469.53
  4. Study on Strength Analysis and Optimization of Minivan-Body Structure Shanghai Jiao Tong University,U463.82
  5. ITER poloidal field magnet feeder system analysis and optimization,TL631.24
  6. Structural Analysis and Optimization on the Model CYJY14-6-89HF of Pumping Unit,TE933.1
  7. Research on Cutter Head and Its Hydraulic Drive System of Shield Tunnelling Machine,U455.39
  8. The Research of Static and Dynamiccharacteristics of Double Buffering Load Sensor Large-flow Amplification Hydraulic Steering System,TH137
  9. The Influence Mechanism and Optimization Study of the Tail Tube Structure for Hydrocyclone Separation,TQ051.8
  10. Turbine on-site repair the mobile CNC milling structure,TG547
  11. The Simulation and Optimization for Induction and Exhaust System of Engine by CFD,U464.134.4
  12. The Refrigerant-side Structure Optimization and Performance Simulation of Parallel Flow Condenser,TK124
  13. The Research of the Structure of Self-motion Assistanced Powered Support Equipment for Roadway,TD353
  14. The Study of the Cutting Theory and Structure Optimization of the Bicylinder Cutting-off Insert,TG501.1
  15. Study on the Detail Optimization of Men’s Suit Pattern Design and Evaluation of Virtual Display,TS941.712
  16. Research on the Structural Optimizaton of Bioreactor with Elephant Ear Impeller and Study on the Shear Properties of Cell,Q813
  17. Dam Surface Partition of Hydrodynamic Load Characteristics in Water Jump Strong Rolling Area and Structural Optimization Study,TV135
  18. The Analysis of FDI Influence on the Jiangsu Service Industry Structural Optimization,F719;F224
  19. Study for Building Modle of the Polishing Process of 5-DOF Parallel Robot and Its Path Planning,TP242
  20. The Research on Harbin Engineering University Teachers Structure,G645.1
  21. Analysis and structural optimization of the internal flow field of single-stage centrifugal compressor,TH452

CLC: > Aviation, aerospace > Aviation > Basic theory and experiments > Aircraft ground tests > A variety of test equipment and instruments
© 2012 www.DissertationTopic.Net  Mobile