Dissertation > Excellent graduate degree dissertation topics show

Design of Intelligent Instrument Remote Control System Based on FPGA

Author: XieYanPing
Tutor: YanFengPing
School: Beijing Jiaotong University
Course: Communication and Information System
Keywords: FPGA USB RS232 Remote Control VC
CLC: TP273.5
Type: Master's thesis
Year: 2011
Downloads: 194
Quote: 0
Read: Download Dissertation

Abstract


Smart and efficient remote control of the instrument is a complex control system , using a computer real - time remote control multiple intelligent instruments and high-efficiency operation of the control system has important practical significance . This article is based on FPGA ( Field Programmable Gate Array ) interface module , through the PC control software to send commands to control intelligent instruments , can significantly increase the speed of the logic control and data processing , real-time monitoring of intelligent instruments . The main research content of this paper : using VerilogHDL USB chip and FPGA , RS232 interface and FPGA optimized design and programming of the module program to achieve the data communication between the USB chip and FPGA , RS232 interface and FPGA , and FPGA the intelligent instrument test data acquisition and processing . 2 using the C language for the optimal design of the USB chip drivers , the communication between the host computer and the USB chip and USB plug-and-play . (3) the use of the C language in VC 6.0 tools were the design of the client application , achieve a host computer intelligent instrument parameter settings , FPGA processed data read and displayed . To achieve a more general purpose and more than one instrument lumped control the expansion of the system design , including the board of the hardware implementation the FPGA expansion of the program and extending the application . Established experimental test system to verify the FPGA and USB chip and RS232 interface between the normal communication between the USB chip with the host computer , and the client application graphical display of test data .

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  4. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  5. Development of LXI Arbitrary Waveform Generator,TM935
  6. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  7. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  8. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  9. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  10. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  11. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  12. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  13. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  14. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  15. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  16. Development of Serial Bus Analyzer Based on Nios,TP274
  17. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  18. Development of Pxibus High Performance Digital I/O Module,TP274
  19. Development of LXI Counter,TP274
  20. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  21. Study on Dynamic Electrocardiogram Monitoring System and Electrocardiosignal Processing Method,TH772.2

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile